| Thread | Last Post | Replies |
|
| New Fan Clutch - now Roars | 27 Oct 2005 02:12 GMT | 8 |
I just replaced the fan clutch on my '95 Crown Vic. It's a weird car, it has 2 fans. The regular mechanical belt drive and also an electric that seems to run when the A/C is on. Anyway - I was checking trans fluid and noticed the fan not turning even tho the engine was. so.. ...
|
| 1988 F250 fuel shut off switch | 27 Oct 2005 01:51 GMT | 2 |
I have a 1988 Ford F250 4wd 4X4 I wrecked the cab and ever science the truck will not start. I am wondering if it might be the fuel shut off switch. The problem is i don't know where it at. called AZ they said behind glove box not there I called O'r they said in the rear of truck i
|
| F150 Power Window Problem | 27 Oct 2005 01:30 GMT | 6 |
Help! I have a 1992 Ford F-150 XLT - Power Windows. The passenger side switch will power the window down but not up. The driver's side switch that controls the power window on the passenger side will power the passenger window up and down with no problem. I just purchased a ...
|
| 95 T-Bird 4.6 LT starter relay | 27 Oct 2005 00:08 GMT | 1 |
I've looked under the hood and in the repair manual for the starter relay location. The manual tells how to test it but not where to find it on the 4.6 LT engine. Any ideas?
|
| ford probe | 26 Oct 2005 14:53 GMT | 1 |
changing clutch on 95 probe and having problem removing drive shafts any suggestions?
|
| PCV valve off, any issue? | 26 Oct 2005 14:22 GMT | 1 |
after doing some work under the hood on my 3.8 '90 Tbird, I had a whistling under the hood that I only 4 days later got to investigate.. I drove maybe 40-50 miles (mostly HARD trying to get it warmed up) during this time.. I found that I had inadvertantly knocked the PCV valve out ...
|
| Need Aerostar engine repair in Orange Co, Calif | 26 Oct 2005 02:56 GMT | 2 |
Can anyone recommend a good / reasonable cost garage in North or Central Orange County, Calif, to do a rebuild job on a 3.0 Aerostar engine? Fred
|
| 90 Mustang 2.3 head bolt socket size | 25 Oct 2005 23:38 GMT | 2 |
I just managed to get to the final stage of removing the head from my 1990 Mustang 2.3 only to find I did not have a socket to fit. Before I guess on size to buy I was hoping someone might know the proper type and size of socket to use.
|
| Tires - Assurance Tripletred | 25 Oct 2005 17:33 GMT | 4 |
Has anyone in the group tried the Goodyear Assurance Tripletred tires? I'm in the market for new tires for ny 02 Town Car and am looking for opinions. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Retired Shop Rat: 14,647 days in a GM plant.
|
| 88 Turbo Coupe upgrades | 25 Oct 2005 05:02 GMT | 2 |
I was just visiting with a friend who is restoring an 88 turbo coupe that he has owned since new. Nice job on the body, now he wants to make it breathe a bit better. Can someone please offer some suggestions for performance upgrades in this
|
| 2003 Mercury Grand Marquis keyless entry pad | 25 Oct 2005 04:50 GMT | 2 |
I recently purchased a 2003 mercury grand marquis. we need to find out instructions for programming the keyless entry pad. we tried the passenger side trunk hinge for the factory codes, but they aren't there on this model. if anyone could help, it would be appreciated Thanks --
|
| 79 ford | 25 Oct 2005 04:04 GMT | 2 |
wiring burned up bought new fusible link now the truck wont hold a charge but there is no draw off the battery and the alternator is new hepl if u know about the ford wiring diagram
|
| 98 GrandMarquis has new life | 25 Oct 2005 02:21 GMT | 3 |
I recently got my 98 Grand Marquis fixed. Needed Ball Joints, upper an lower , Tie Rods, alignment, brake rotors and pads, new spark plugs and idler motor. Total cost about $1200. These repaires occurred over a period of about 2 months. May sound like a lot of
|
| Ford vs Saab | 25 Oct 2005 01:47 GMT | 3 |
Saabing.com features popular Free Saab Classifieds section in the USA and CANADA and a free Saab Worldwide Directory to promote Saab related wesites, dealers, mechanics, OEM replacement and performance parts suppliers, Saab Junk
|
| Heat does not work | 25 Oct 2005 01:35 GMT | 4 |
For the last two winters in a row my heat has not worked it comes out just barely warmer than the outside temperature. I have gotten my heating core flushed out by a local radiator company, and it has slightly improved the temperature outbput, but it has never gotten back to what ...
|