Ah a Ford newsgroup, oh dear too many sad people in here. Ford st170 pah
what a load of crap.

 I have been getting a Check Engine Light only when I accelerate when I
drive, once I let off the gas the light goes out. Any thoughts on where
to
start troubleshooting - The car is old 88 t-bird V8 169K miles - I really

Visit http://www.cars-houses.com/ to list your ad for free.

what would cause my windows to go down but not up from either switch

My girlfriend has a 1997 Ford Taurus, 80K miles.  Since buying it slightly
used in 1998, she has paid several hundred dollars per year to make the
SERVICE ENGINE SOON light (aka the PAY MECHANIC NOW light) go away, which
lights up at least once or twice a year.  Rarely has the ...

I'm not even gonna go into how I should know this--but I don't-I'm
replacing the high press. line on the PSP in my 72 F-100,(360, Cherry,
makes even me look cool). No press. in line now-big hole- Once its
replaced, can I just fill up the res. then bleed it by turning the wheel

when i get in the car my sensor for the doors that say they are shut reads
that they are not shut and the lights inside stay on even though all the
doors are shut. How do I fix this

hello,,, im having truble with a heater in a 1999 f150, hot cold switch
wont work rightit wont blow out hot air till u start moving like just 10
ft,its like sumething kicks on. turn off main suitch and back on and cold
air agan till u move forward just a bit like sumthing is kicken ...

I recently won one of these things and although it is fun to scoot around
in, the stereo in it leaves a lot to be desired from a sound quality point
of view. It has a 6 cd changer and since it is hard to make really bad
electronics these days, I thought I would start with a ...

I just tried to change out the front pads on my '94 Tbird. I could not get
the guide pin out. It seems to have a Torx T50 socket on the end and I
actually managed to break a Torx bit trying to remove the guide pin.
Any suggestions on how to get it loose?

Hey I build a new 4.6 to put back in my 94 Crown Vic. But I want to beef it
up a little but also nut get to crazy in prices I was thinking  a cam and
maybe some pistons. anyone know what i should use or do. thank for any help!

This truck has a 4.9L engine with a 3 speed automatic transmission.  It has
approx. 109,000 kms and it runs very well for its age.  I had it on the
highway today because I needed it for work, probably only the 3rd or 4th
time I've driven it on the highway since I've owned it.  ...

I've compiled several charts of vehicles that get the best gas
mileage--including trucks and American cars at
http://infozak.com/carmileage.html

Can anyone supply me with the car wiring colours/diag for a tow socket on a
Ford Fiesta Encore '96 reg.  The socket is already wired - I just need to
connect it up to the car.
Thanks

My chevrolet pickup will only run on four cylinder some time and at other
times it will run on all 8,when it running on four cylinders only one side
of the fuel injector is pumping gas, could this be the computer or fuel
injector? If it's the computer, where is it located?