| Thread | Last Post | Replies |
|
| Location of OBD on 1996 F-Series | 04 Nov 2005 18:18 GMT | 4 |
Hello all, would anyone happen to know where exactly the connection is for the OBD II on a 1996 F-250? I have a friend's scanner for a few days and want to check out why my CEL is on. Looked around under the dash, but can't find the interface...anyone? Thanks in advance! The
|
| 2002 TAURUS**Help** | 04 Nov 2005 18:14 GMT | 4 |
The past couple of weeks my car has been doing this hiccup thing when I am sitting still or moving slowly in traffic. It also has affected my "get up and go". When I am running at full speed it is fine. Yesterday they check engine light came on when I left work and hasn't gone off ...
|
| Ford Crown Vic headlight beam angles | 04 Nov 2005 17:16 GMT | 7 |
I have a 2002 FCV here in the UK which failed its pre-registration (SVA) test today as the headlight beams kick to the right and not the left as required (due of course to our driving on the left). I had wrongly assumed it had flat-beam headlights like most US cars, but it's
|
| 2002 Crown Victoria Heater Blower Switch | 04 Nov 2005 09:11 GMT | 5 |
How do you remove dash access panel to remove and replace blower switch?
|
| Does anyone know a good how to website?? | 04 Nov 2005 04:29 GMT | 3 |
Just looking for a good website with how-to instructions on diags. and so forth. thanx ginetta
|
| remote car starter | 04 Nov 2005 03:25 GMT | 4 |
I am wanting to install a remote start on my 96 truck I need somethign with good range. What is best that I can buy and install myself?
|
| 99 ford e150 abs light came on while driving | 04 Nov 2005 03:08 GMT | 1 |
i have a 99 e150, while driving home on a trip out abs light came o and never went back off, any suggestions on how i can get the ab codes? i tried a code reader but it found nothing. any info in wher i can activate the test and what the codes mean would be great
|
| 1984 F-150 lower kingpin | 04 Nov 2005 03:05 GMT | 2 |
Can anyone tell me anything about replacing a lower king pin in the old Ibeam suspension, two wheel drive.
|
| Failed Mass auto inspection | 03 Nov 2005 23:52 GMT | 7 |
I am looking for a computer for a 1998 Escort. Having a hard time finding the part on the Web. Anyone know a site where I can get the part. The part is labled f8CF-12A650-MC. Thanks John
|
| How to dispose of 93 Aerostar? | 03 Nov 2005 23:15 GMT | 6 |
I've got to dispose of my 98 Aerostar with major engine trouble. Everything else works fine, but has 170K miles on it. The local junk yards will give $100 max. Donation will only give me $500, which means about $100 or so off my
|
| HELP!! A MILLION PROBLEMS WITH 96 TAURUS!!!!!!!!!!!!!! | 03 Nov 2005 22:13 GMT | 11 |
WHERE DO I BEGIN THE AC DOESNT BLOW IT SPUTTERS WHEN IN IDLE OR DRIVING IT JERKS TO SECOND GEAR AND IF THE AC DID BLOW THERE ISNT ANY HEAT OR COLDNESS THAT COMES OUT. PLEASE HELP ME OUT IM A GIRL THAT KNOWS NOTHING ABOUT CARS EXCEPT THAT I WILL NEVER BUY ANOTHER FORD.
|
| 05 taurus external mirror replacement | 03 Nov 2005 22:11 GMT | 3 |
I am trying to replace the whole external driver side mirror shell for a 2005 ford taurus. I have read that I need to remove the black triangle deal from inside the car and it is held together by one screw. I have found that screw and removed it but the plastic triangle still
|
| 1993 Ford Ranger (Brake light switch) | 03 Nov 2005 06:40 GMT | 18 |
Hi, I was wondering if anyone knew exactly where the brake light switch is on a 1993 Ford Ranger and is it hard to change on my own without buying the mechanic a new house? I have no brake lights and changing bulbs doesn't work so we know it is the switch. Thanks in advance.
|
| 1994 Mercury Grand Marque | 03 Nov 2005 03:12 GMT | 24 |
I keep getting a code 189 (adaptive fuel limit reached, left side). I have a new Fuel filter, Fuel Pressure Regulator, Throttle position sensor, Vehical speed sensor, and Oxygen sensor left side. Any clues?
|
| 2003 Windstar Disable Autolock | 03 Nov 2005 02:42 GMT | 3 |
Is there a way to disable autolock on a 2003 Windstar without a keypad other than taking it to a Ford Dealer? I know that there was a method in the 1998 manual, but the key positions have changed since then and I'm not sure if it still works even if I guess correctly.
|