| Thread | Last Post | Replies |
|
| power steering fluid leak | 06 Jan 2006 13:10 GMT | 1 |
How much for a repair on a power steering rack on an '02 Taurus? There doesn't seem to be a leak on the boot itself, only where the rubber boot seals up against the metal shaft.
|
| FS: 1966 Galaxie 4-door | 06 Jan 2006 12:17 GMT | 5 |
Greetings. I bought this car thinking I'd finish it off and give it to my daughter as a graduation gift. Now I find my self with no time at all to work on it, and my daughter has lost interest in such a big car. I'd like to get $3,500 as that's what I have invested in it so far ...
|
| 1990 Ford Escort GT - Power Steering Fluid Everywhere | 06 Jan 2006 03:47 GMT | 5 |
I've had the car sitting for a few months now and when I moved it yesterday I noticed a small puddle on the floor underneath the steering rack. When I pulled it out of the garage and turned the steering wheel a bit I found a huge puddle on the driveway, where I first turned the
|
| '94 Taurus GL 3.8 | 06 Jan 2006 02:04 GMT | 1 |
Approximately how much should I anticipate spending on replacing the head gasket? Hours of labor? Cost of the kit and needed materials? The car overheated today due to a blockage in the radiator. The water pump and thermostat had just been replaced a few months ago. I ended ...
|
| Anti freeze renewal help | 06 Jan 2006 00:49 GMT | 11 |
I want to change the anti freeze in my 93 for escort 1.4 single point injection. I only have a resevoir tank to top up, how can I get some of the water out as just to top up with anti freeze, I have no filler cap on top of the
|
| 1994 tbird tranny, about to go, cost$$$? anyone? | 05 Jan 2006 17:58 GMT | 2 |
Uh, it slips more and rattle when in 2nd/3rd, rumbles into OD now. So, it looks like a rebuild is in order very soon. Any of you had this make/model tranny rebuilt before? About how much money is this going to set me back?
|
| Power stering pulley | 05 Jan 2006 07:27 GMT | 6 |
how to remove power stering pulley in 5.0 HO Ford engine ('91 T-bird)? Do I need some special tool. I need to remove it to take off powwer stering and AC bracket and after that remove a cylinder head..
|
| Taurus A/C | 05 Jan 2006 06:48 GMT | 3 |
I am having my 98K mile 1996 Taurus's AC looked over. The car needs tranny work and the AC has a leak. 2 - 3 lbs refrigerant/year. So far the mechanic has not found the leak. Could be the evaporator, under the dash. If so it is a car killer.
|
| Radiator Leak | 05 Jan 2006 04:39 GMT | 2 |
'96 Explorer, V-6, auto. trans. I noticed a slight leak where the upper transmission cooler line comes thru the plastic radiator. It appears around a large washer and large nut that seem to hold the unit into the radiator. Before I dump a can of stop leak
|
| Best time to buy new? | 05 Jan 2006 01:30 GMT | 3 |
Will be in the market for a new Escape soon. Anyone know when Ford will be having another sale? If memory serves it seems the companies often have sales in February. Anywhere on net where they keep track of such things as car sales?
|
| want to sell or buy cars? | 04 Jan 2006 23:12 GMT | 1 |
Want to buy or sell a car? Visit cars-houses.com website http://www.cars-houses.com/ to list your ad or search ads for free. It provides advanced search features. You can register
|
| unknown problem 2 | 04 Jan 2006 22:49 GMT | 3 |
car is a ford contour 1998,with 95,000 miles and a rebuilt trans. 4 cylinder. cruising along the highway when i heard a whirling grinding sound. all of a sudden the engine stopped dead. i tried to restart but i got the same whirling grinding sound as the engine was trying to turn
|
| Ford Ranger/Mazda truck question | 04 Jan 2006 16:43 GMT | 5 |
Anyone here have any experience with the Mazda trucks that are the same as the Ford Ranger? My daughter has a 1999 Ranger 4X4 and is quite pleased with it. My 89 Nissan truck was destroyed in Katrina (along with everything else we owned)
|
| Factor Alternator ONLY?? | 04 Jan 2006 14:06 GMT | 15 |
I have been having electrical problems with my 2001 Ford Focus for about 3 months. Replaced battery, alternator (twice) and computer. Lights still flicker, car still idles at like 3 different speeds, etc. Now they tell me that the car can ONLY work with a Ford factory
|
| 1978 F-150 Brakes - PLEASE HELP | 04 Jan 2006 08:44 GMT | 4 |
The brake pedal is very hard. I have changed out the master cylinder, and now the brake light keeps coming on. How can I tell if I need to change out the power brake booster? If so, how do I i get it off? I removed the 4 bolts, but I can't seem to get past the linkage.
|