| Thread | Last Post | Replies |
|
| Expedition Wiring | 26 Jan 2006 15:39 GMT | 4 |
I've asked this question 3 times on the Expedition forum and been ignored. I have an 04 Expy Eddie Bauer, it does not have a power seat on the passenger side, did it come pre-wired for a power seat? ..
|
| UK Fiesta Brake Pads. | 26 Jan 2006 07:35 GMT | 5 |
Hi,I have just renewed the front brake pads on my wife's 1998 ' R ' reg Fiesta 1.3 Encore.The original pads were really worn down.Since fitting the new pads there is a grinding noise coming from the brakes when driving.It sounds like the calipers are rubbing
|
| Gas Tank Leak ? on 95 TAURUS GL, 3.8L, 16 gallon tank ? | 25 Jan 2006 18:48 GMT | 3 |
I've noticed a gasoline odor in my garage after my last several gas tank fills. Odor goes away after top fourth of tank volume is consumed. After sitting in garage a few days, after my most recent tank fill I noticed a drop of gas originating from top of passenger (right) front of ...
|
| esc0rt problems | 25 Jan 2006 14:59 GMT | 2 |
so i finally got my escort running but it wasnt firing on the third(third from the left) cilundar so i thought maybe i hooked up the wires wrong well i took off the wires while it was running *slaps myself so now it wont start and nothing works it makes a clickign nose under the ...
|
| FORD CURRIER/HOOD | 25 Jan 2006 14:50 GMT | 3 |
Does anyone out there know how to fix a hood that came flying up all the way to the windshield when I was driving? I had to take apart the windshield wipers and then
|
| 92 ranger compression test | 25 Jan 2006 14:28 GMT | 3 |
i have a 92 ranger 2.3l and i think the head gasket is blown. i did a compression test and got the following results: 105,105,60,165. just wondering if it could be more than a bad head gasket. why would the pressure in #3 be so low and in #4 so high? is the compression from #3
|
| 1996 Ford Crown Victoria ABS Light on-Codes?? | 25 Jan 2006 07:20 GMT | 4 |
Hi, I have a 1996 Crown Vic that the ABS light came on (brake warning light is off). I plugged my code reader into the OBD-II port and there are no codes. Is there something I'm missing to obtain the codes from the ABC control module? The car has a 4.6L engine and is a P71. Thanks, ...
|
| 2004 F-150 XLT | 25 Jan 2006 06:13 GMT | 2 |
Alldata says there is no cabin air filter for this vehicle, but it is in the service schedule. Can anyone clarify? Thanks!
|
| "Ford will lay off 30,000" | 24 Jan 2006 19:42 GMT | 3 |
Ford will lay off 30,000 Ford Motor Co. yesterday said it will close 14 North American manufacturing facilities and cut employment by up to 30,000 in the next six years as part of a broad restructuring meant to reverse financial
|
| Posi-Traction Installation? | 24 Jan 2006 16:20 GMT | 3 |
Howdy all, I have a 1963 Galaxie 500 Fastback. Although I have not opened it up to confirm, the paperwork that came with the car (I bought it in April) states that the car has a 9" Ford rear-end and 3.50 rear gearing.
|
| 1998 Mercury Sable Starting Problem | 24 Jan 2006 15:59 GMT | 2 |
I've got a 1998 Mercury Sable that runs fine, but at random times will not restart after it has been stopped. The engine cranks normally, but sort of catches and sputters and won't keep running. Then I have to wait about 10 minutes and it starts up just fine. The fuel filter ...
|
| 1990 ranger DPFE | 24 Jan 2006 04:47 GMT | 2 |
I am trying to help my brother in law with his 1990 ranger. Its got the 2.3 8 plug motor. He is looking for the part number of the DPFE sensor. And what other vehicles and years of sensors would swap with it?
|
| Ford to slash jobs, close factories | 24 Jan 2006 04:29 GMT | 4 |
1/23/06 Reuters Ford Motor Co. on Monday said it would slash up to 30,000 jobs and shed more than a quarter of its production capacity as it moves to cut costs and stem
|
| 97 Taurus - now the Cruise control doesn't work | 24 Jan 2006 01:20 GMT | 8 |
When I turn the MASTER (cruise control) on, the green light in the panel comes on, but when I try to set the speed, nothing happens. Any idea about that?
|
| converson 3.8 to 4 2 | 24 Jan 2006 00:04 GMT | 1 |
Help please... Hi i have a 91 t bird sc super charged3.8L the motor was blown and i had a 4.2L i stripped both blocks and instulled all external parts on to the 4.2 the blocks are identical except the spark control sensor unit mounting bracket, on the 3.8 it's molded into the ...
|