| Thread | Last Post | Replies |
|
| Danger of death from Toyota! | 12 Feb 2006 11:11 GMT | 1 |
Details on a site: http://www.autotrue.com/
|
| Ford Fiesta trouble | 12 Feb 2006 00:28 GMT | 6 |
have a ford fiesta 1.3 Lx 1995, which when running makes a high pitched whirling sound from the carberetta, any one have any ideas of how to fix this or cause of probel...Cheers
|
| How hard is blinker switch to change? | 11 Feb 2006 22:57 GMT | 2 |
We have 93 ford taurus with suspected bad blinker switch. We are thinking of changing it ourselves or with help from family (that actually knows something about car repair). ...just wondering if we should bother or just pay the 50 bucks for labor -- maryh
|
| Focus seat belt is locked | 11 Feb 2006 20:38 GMT | 2 |
My daughter has a 2004 Focus. She was in a minor accident and rear ended a pickup truck at a very low speed. The only damage to her car was a slightly dented hood, which is not visible unless you are less than 6 inches away. The problem is that the air bag light is on and
|
| Ford Fiesta | 11 Feb 2006 16:09 GMT | 1 |
I have a Fiesta '93(K) 1.1 CFI (push rod) engine with 85k on the clock It will start and tick over fine but develops no power so top speed is 45-50. I have changed plugs/leads/head gasket had the clutch checked for slipping and put additive in the fuel - no joy. Does anyone have any ...
|
| Buring too much fuel | 11 Feb 2006 15:49 GMT | 11 |
I found this site Http://Ricksdistribution.com Does this help?
|
| Katrina Lemons | 11 Feb 2006 12:36 GMT | 2 |
Holes in Monitoring System Let Lemons Get Resold Morning Edition, January 31, 2006 · Thousands of vehicles that sat in the murky waters left by hurricanes Katrina and Rita are starting to show up on the used-car market.
|
| 87 T-Bird noise | 11 Feb 2006 09:07 GMT | 2 |
If a car has a bad ball joint, will you be able to 'feel it' through the steering wheel? Thanks in advance for your answers! Gerri
|
| Ford Still Making Taurus? | 11 Feb 2006 02:24 GMT | 5 |
When I rented a car from Hertz today in the DC area, I ended up with a Taurus sedan with only a little over 1K miles on it. I thought Ford was not making the Taurus in the 2006 model year. Are they still making them for Hertz's rental fleets?
|
| Intake Manifold on a 66 Bird with 428 | 10 Feb 2006 21:02 GMT | 3 |
I'm on to the next level of getting my classic 66 Town Landau 428 fixed up. This weekend is replacing the intake manifold gaskets and valve cover gaskets. Is there anything special I need to know going into this? I do have the original manual and I'm using a mobile mechanic that ...
|
| 1998 Ford Windstar | 10 Feb 2006 19:27 GMT | 6 |
we bought a van that supposedly just needed a crank sensor. we put a new one in and the car will not turn over. changed coil pack, did not work, changed some gaskets and the brain....still not turning over. spark plugs not firing but are getting flooded out! can not figure it out. ...
|
| Cleaning 94 Escort 1.9 Idle Air Control Valve? | 10 Feb 2006 11:44 GMT | 15 |
I'm fairly convinced that the erractic idle/stalling from idle I'm getting on the subject Escort is due to a balky IAC valve. Going to pull it and clean it and hopefully avoid replacing it. Whats the best solvent/cleaner to use? Carb cleaner seems like the obvious choice. Any ...
|
| Ford Plant Closures | 09 Feb 2006 22:59 GMT | 3 |
I read an article today in our paper stating Ford will be pay $100,000.00 each to all of its workers loosing their jobs due to plant closures. I find this rediculous by a company that can't produce a quality vehicle and sales are slumping. I owned a Ranger for a couple
|
| 97 ford taurus | 09 Feb 2006 15:39 GMT | 1 |
I have a 97 ford taurus. When you start it up it idles fine for about 30 seconds then it moves up to 1500 rpm and when it get normal temperature it idles about 2000 rpm. It also cuts out at 4000 rpm. I bought a throttle position sensor and an idle air control valve and it still ...
|
| 2000 Sable | 09 Feb 2006 15:33 GMT | 6 |
Hi, I have a couple questions regarding my 2000 Sable. First, is there a way to manually retrieve the ecm codes like other mfgs, or do I have to get a code reader? Also, has anyone experienced poor gas milage? The car runs fine, plenty of
|