I have  Ford Taurus CL. it has the 3.0 Liter FI 12 valve Engine
I want to replace the Ignition wire set with 115,000 miles on it
Ive searched the web and found so many replacement Vendors.
What is closest to the original part and will last as long as the original?

I know some like me and some do not or are just ticked at me for saying
some things... But...
I'm thinking adding pictures to you ideas for help would not hurt. Most
people have digital cameras at hand, some don't and I realize that. I

I have a 2002 sable.Can someone tell me where the low pressure ac port
is?
I have a R134 hose but the fitting will not fit on the one port I can
find.The port I can find is a black tube sticking up on the passengers

4/21/06
(AP) Ford Motor Co. said Friday it lost $1.2 billion in the first quarter,
its worst performance in more than four years, as revenues fell and the
nation's second-biggest automaker started a massive and costly North

I visited a used car lot and not one of the cars for sale had a documented
mechanical service record.  It seems a while back, servicemen would apply a
sticker to the door jamb which minimally documented service by date and
mileage.

I have an '01 Windstar that my code reader reads an error as if it
wasn't plugged in. I've tried the reader on my '03 Marauder and it
works just fine. I've checked the OBD plug and everything looks fine.
Any ideas?

The horn alarm on my 2005 Ford Escape keeps going off while I am at
work, probably 1-2 times a day.  It also goes off at home if I leave
the car outside, but if I park in the garage it does not go off.  It is
a standard factory proximity alarm, whatever usually comes with that

http://www.usnews.com/usnews/biztech/articles/060424/24oil.htm
Read it... lotsa good stuff.  And some narrow thinking, naturally by the
environmentalists.
My view {which, to understand, you need to read the article}:

The pulley broke the other day, and I'm considering doing it mtself-
I'm fairly mechanical, and have a decent set of tools-
I was wondering about retensioning the belt.  The tensioner is at the
bottom of the engine- do I really need a special tool to loosen the

My Mustang has developed 2 distinct noises in the rear tires (they
started at about the same time - they may be related for all I know).
On the rear driver's side, if I hit the slightest bump I can hear a
loud clanking sound.  Like a metal rod beating up and down.  First

Got a code 45, near as I can tell(from a quick search) its probably a
badly grounded front crash sensor. Anyone know off hand(specifically)
where it is? I'll probably start looking tomorrow for it...Or....if I'm
misinformed by the code, please do tell details :)I prolly should ...

Problem with a 1987 ford escort.  
In the mornings it is very hard to start and dies about 4 or 5 times.
During the day if it sits for awhile.  It will some times die but
usually only once.

I have a new compressor for my old Escort GT, just wanted to get the
correct procedure for adding the oil to it before I install it.  Was it
clutch side down, and spin it while you pour the correct amount in?
I'm thinking three oz. esther for the new compressor, but I know to

my fiesta keep leaking oil from around the driveshaft on the drivers side,
i have had the oil seal and a new drive shaft fitted are there any reasons
why it may still be doing this. also there is a whirring/vibration noise
when travelling above 30mph or so. the car had an impact on ...

1992 ford ranger pickup, ext cab.
3.0 l, 5 speed manual 2wd.
120,000 km,  ~75,000 miles
The transmission is stuck in reverse, clutch is fine.