| Thread | Last Post | Replies |
|
| AC IN MY 1992 FORD TEMPO | 06 Sep 2006 03:51 GMT | 2 |
I HAVE A 1992 FORD TEMPO GL, BUT MY AC DOES NO WORK. IT BLOWS OUT AT THE TOP VENTS, BUT THATS ALL. MY AIR COMPRESSOR DOES NOT CUT ON AT ALL,BUT I CAN JUMP IT OFF OF MY BATTERY AND IT CUTS ON. CAN ANY ONE HELP ME OUT...
|
| 98 Windstar Mileage | 06 Sep 2006 02:07 GMT | 3 |
I have a 98 Windstar with the 3.8 (no antifreeze in the crankcase, thank goodness!) and 94K miles. The gas mileage has taken a nosedive of late - overall mixed driving is returning less than 14 mpg. EPA estimates are 17 & 24 for this vehicle, and that's about what it used to ...
|
| windstar shutter when letting off gas | 06 Sep 2006 02:05 GMT | 1 |
99 windstar 104k Sometimes when I let off the gas the van does this vibration/shuttering thing. Not too violent or anything, I think only the driver notices it. Seems to do it at certain speeds, around 40 seems to be pretty common, I
|
| Advice on Freestar | 06 Sep 2006 01:49 GMT | 1 |
Hello, I'm looking into purchasing a 2006 Freestar and was hoping to hear from someone who already owns one. I am aware of the fact that the Freestar is not a segment leader, but after a few incentives from the dealer I'm sure I could get one for much less than a Sienna or an
|
| Ford Taraus door access code | 06 Sep 2006 00:16 GMT | 3 |
I have looked on the trunk hinge, behind the guard on the device itself, in the glove box, on the driver door, I even climbed in upside down to try and read any codes on all the boxes under the dash, I can't find any code or reference to the code, the "steeler" wants $100.00 to
|
| REQ: Need Help on 2006 GM LS | 05 Sep 2006 22:28 GMT | 3 |
Got a problem that has cropped in the last few months with the alarm? system. When making a sharp right turn-270 degrees, 25-30mph, alarms/buzzer inside the car go off and stay on several minutes. Dealer unable to fix or reproduce problem...no scan codes,nothing..seems to come ...
|
| engine stalls when hard braking | 05 Sep 2006 20:43 GMT | 1 |
this pertains to a 1996 ford ESCORT LX sw, w/ at, ac, 230000 miles: recently during the last few months whenever i'm travelling at between 20 and 40 mph and i've had to brake very suddenly and very hard, the engine stalls as soon as the car comes to complete stop. never used to
|
| Amsoil and Non-API Licensing & Warrenty Issues | 05 Sep 2006 09:24 GMT | 56 |
Q. Why aren't all AMSOIL motor oils API licensed? A. Good question. Let us address API licensing in depth, as well as the issue of warranties. Some AMSOIL motor oils are API licensed, some are not. If you're concerned about your warranty and feel pressures to
|
| E150 RUNS HOT 300-6 | 05 Sep 2006 05:51 GMT | 4 |
When pulling a trailer, the termp gauge reads right between the normal line and the "H." Otherwise, it reads somewhere near the middle of the normal range. The clutch fan seems to be working fine. Thanks.
|
| 06 Ranger & odometer questions | 05 Sep 2006 05:06 GMT | 6 |
got a buddy with an 06 ranger, and to get around his limitation in kilometers in his lease, he unhooked the fuse for the dash. Now when he puts the fuse back in, the check engine light is on. He thinks the truck is logging kilometers some other way than with hte odo on the
|
| 04 taurus oil filter $55???? | 05 Sep 2006 04:37 GMT | 15 |
i had the oil changed today in my 04 taurus. the tech told me it was the original filter which should be replaced every 15k miles (29k on the odometer now). price for the filter is $55 he told me? i told him to hold off on it? seems
|
| Fuel Injectors? | 05 Sep 2006 04:05 GMT | 3 |
2001 crown vic 4.6...suspect fuel injectors are leaking fuel into the cylinders when sitting. How do i go about checking this problem?
|
| inertia switch | 04 Sep 2006 18:03 GMT | 2 |
can anyone tell me about problems with inertia switch on 2004 ranger? after re set truck runs rough when it finally starts {this culd take hours to start} then dies again
|
| NOISEY BEARINGS BELT TENSIONER AND IDLER PULLEYS 94 CROWN VIC | 04 Sep 2006 17:29 GMT | 6 |
I do not want to replace either complete assembly, only the actual bearings themselves, which appear to be identical. Would anyone happen to know of a source for these bearings? Thanks.
|
| uw droomauto nu gewoon betaalbaar | 04 Sep 2006 17:12 GMT | 4 |
Beste Ford-liefhebber, Altijd al in uw favoriete model van Ford willen rijden, maar financieel niet haalbaar? Vanaf nu is dat verleden tijd. Met een lening tegen de gunstigste tarieven kunt ook u financieel verantwoord in uw droomauto gaan rijden. Kijk
|