| Thread | Last Post | Replies |
|
| Ford chief seeks help from Toyota | 09 Jan 2007 13:42 GMT | 132 |
By Micheline Maynard International Herald Tribune December 27, 2006 (Detroit) The new chief executive of Ford Motor, which is struggling to
|
| Escort ZX2 timing belt problem | 09 Jan 2007 13:06 GMT | 2 |
Hello, I replaced my timing belt about 6 months ago. I replaced the tensioner and idler pulleys along with the belt. The belt has failed again. It looks like the belt slowly slipped off the sprockets and wore the edge off. I'm wondering if anyone knows what I might have
|
| 99 Explorer XLT V-8 | 09 Jan 2007 07:24 GMT | 1 |
I've been happy with the performance of this vehicle since I've had it. Now the ABS light is on and stays on. What does this mean? Is this an urgent thing? What will happen if it's not taken to a dealer to check out?
|
| Ford CEO Mulally says Jaguar not for sale | 09 Jan 2007 05:34 GMT | 1 |
Kiss of death? By Poornima Gupta Jan 7, 2007 (Reuters) Ford Motor Co.'s British luxury division Jaguar is not for sale,
|
| 1992 Ford F-150 Turns Over Won't Start | 09 Jan 2007 04:17 GMT | 7 |
Truck spins over fine, and "almost" starts but not quite. Air cleaner(s) is fine. What's next? Should I go a buy a $50 code reader? Is that going to help? Thx.
|
| Change of Carburetor | 08 Jan 2007 20:51 GMT | 2 |
General question: What would it cost to convert a 1968 302 V8 from a 2 barrel to a 4 barrel carburetor?
|
| 71 Ranchero.. is it worth it? | 08 Jan 2007 18:15 GMT | 14 |
I saw a nice (nasty color, but good condition; no rust, couple of minor rock dings in the paint) '71 Ranchero near me, 302 V-8. Owner wants $3,400 for it. He's using it as a daily driver at the moment. Doesn't appear to be smoking or leaking anything. Does this sound like a
|
| 1993 Taurus oil leak. Trying to pinpoint REVISED | 08 Jan 2007 17:49 GMT | 4 |
Helllo Gang. I have a 1993 Taurus that's leaking oil. I have replaced the oil pressure sending unit, that is OK. I have a nice pool of oil right at where the distribuitor goes into the engine on top, now this isnt the first time ive had this, i have replaced the O-Ring that ...
|
| 1993 Taurus oil leak. Trying to pinpoint | 08 Jan 2007 17:17 GMT | 2 |
Helllo Gang. I have a 1993 Taurus that leaking oil. I have replaced the oii pressure sending unit, that is OK. I have a nice pool of oil right at where the distribuitor goes into the engine on top, now this isnt the first time ive had this, i have replaces it about a year or so ...
|
| Windstar Google group | 08 Jan 2007 14:11 GMT | 1 |
New windstar Google Group New windstar website Tech info, engine pics, manual plus more. Visit the New windstar website plus google group see the site at http://groups.google.com/group/Windstar?lnk=li
|
| Ford Lincoln Mercury Ford Truck OEM Parts Books for Sale | 07 Jan 2007 05:07 GMT | 5 |
I have the following OEM Ford factory original parts books for sale on microfiche. Drop me a line with any interest. Thanks, Joe. FORD NA 1980 AND UP SPEEDOMETER GEARS Feb-99 FORD 03 AVIATOR 9/02
|
| Taurus horn relay | 06 Jan 2007 22:20 GMT | 1 |
Antbody know where the horn relay is on an 05 Taurus. I can hear it clicking near the fusebox under the dash but can't seem to locate it. Thanks
|
| 98 Windstar door ajar sensor malfunction | 06 Jan 2007 20:18 GMT | 8 |
Intermittently my 98 windstar senses a door ajar, and the alarm sensor contiunous bongs. I check all doors and it won't go off. Alarm rings & interior lights stay on until 25km/hr and then go off.
|
| What should I do with this car? 1999 Ford Contour | 06 Jan 2007 20:07 GMT | 5 |
I have a 1999 Ford Contour with 90K miles on it. I want to buy another car in a year (if this one makes it that long). I need to know if should invest money to fix the following things: 1. The left drivers electric window won't go down (has been 'fixed'
|
| 96 Ford Contour Timing Belt Replacement | 06 Jan 2007 17:07 GMT | 1 |
I'm helping a friend replace his timing belt on his 2.0 Zetec engine. We put in the camshaft peg and the camshaft holding tool and set up the valve timing and the belt tension etc.. When we take everything out and turn the crankshaft, we notice that the exhaust side cam procket
|