| Thread | Last Post | Replies |
|
| Where is the starter relay on my 1989 ford crown vic? | 20 Mar 2007 09:08 GMT | 1 |
|
| BYPASSING OXYGEN SENSOR--QUESTION FOR TOM A. ET AL. | 20 Mar 2007 07:59 GMT | 2 |
I would like to bypass the defective oxygen sensor in my 1989 Ford Ranger 2.3. If I jump the signal wire out and signal return terminals on the computer, will the computer think the phantom oxygen sensor is reading
|
| Looking For Engineering Job? | 20 Mar 2007 07:35 GMT | 2 |
Simply Find Your Engineering Job Vacancy and resources here --> http://www.jobbankdata.com/job-engineering.htm
|
| Ford vehicles, parts | 19 Mar 2007 23:49 GMT | 2 |
I found Ford auto parts for any vehicle on this website i stumbled upon. New, vintage, custom, ANY part for ANY vehicle!.!! I was very surprised. Go to www.freeadsonlyne.com I had to go through their sitemap to find it though but it was well worth.
|
| 98 Ford Ranger - Only High Fan Works | 19 Mar 2007 23:40 GMT | 6 |
Hello I am having a problem with my 98 ford ranger, only the high setting of the fan works none of the other settings? Any idea's what I can check? Last year when I had my fan belt replaced, power steering, replaced all the fan speeds worked for about
|
| Flimsy Plastic Front-End Work DOES Serve a Purpose | 19 Mar 2007 18:54 GMT | 9 |
Flimsy Plastic Front-End Work DOES Serve a Purpose If you drive a GM passenger car, you know what I'm talking about. Its all the plastic under the faux front bumper which overhangs the wheelbase for convenient scraping the pavement when negotiating road dips, snow and mud
|
| 1986 ford f-150 skipping/stalling | 19 Mar 2007 03:05 GMT | 2 |
starts skipping after driving in stop and go traffic looses all power.engine stalls and will not start back up for a while
|
| As gas tops $3 in Calif., 'petro-noia' hits U.S. | 18 Mar 2007 08:24 GMT | 8 |
Ford just seems to have no luck at all. Bye-bye for a significant number of Super Duty sales As gas tops $3 in Calif., 'petro-noia' hits U.S. http://www.detnews.com/apps/pbcs.dll/article?AID=/20070308/AUTO01/703080345/1148
|
| Help with throttle surge | 18 Mar 2007 08:19 GMT | 3 |
i start my truck up and let it run for 5 mins and when i press the throttle the rpms will dip down before they go up why?
|
| my 93 taurus won't start | 18 Mar 2007 06:45 GMT | 4 |
Well I just discovered that mine is a CCD TFI module and so not subject to the same specs as pretty much everything I've been reading. eg #4 wire from the bottom on the module harness is not a 12V in start wire but is instead a IDM or Ignition Diagnostic Monitor
|
| Turn signals and hazard lights | 17 Mar 2007 22:17 GMT | 1 |
All turnsignals and hazard lights on our 1996 Windstar suddenly stopped working. Any ideas where to start looking?
|
| Snap-On Tools for sale, on the bay cheap! Toolbox | 17 Mar 2007 13:32 GMT | 1 |
http://search.ebay.com/_W0QQsassZt4613QQhtZ-1 I will be listing LOTS more in the next few weeks Thanks for looking
|
| 02 Taurus won't shut off | 17 Mar 2007 11:09 GMT | 5 |
Last week the wife was out in the 02 Taurus. Tried to start the engine and would only run about two seconds and then quit. After a few tries and 20 minutes later, it started and ran fine. Yesterday, the door ajar light came on showing all doors open and would not go out. All ...
|
| RADAR WRONG again! Worth fighting for! | 17 Mar 2007 05:25 GMT | 8 |
This is what I'm fighting for. The are not used in accordance with the proscribed legal methods. The authorities will start banning GPS next, like they did in Switzerland. Why? Go the the link
|
| Mercury Sable engine failure | 17 Mar 2007 02:55 GMT | 7 |
My ex's 2001 Mercury Sable twin cam V6 engine bit the dust. Per the dealer, one or more cams on the right bank did not get lubrication. The cams were destroyed and the head was damaged. They are recommending a new engine. Oil level and pressure was normal.
|