I have a 2000 Mercury Marquis and often in the morning it barely runs for
two or three minutes.  Requires several restarts.  Once it runs a bit all
clears up and car runs fine.
Car has about 66000 miles.

I have a 1995 Ford Thunderbird - it has 82k miles.
3.8L - 6 cylinder
I recently started to experience a lack of power when I try to
accelerate from stop (for instance when I hit the gas at a stop light,

Just wondered if anyone know that the cobra brand oil is actually made
by Irving Oil.  Many may not know Irving Oil, unless from eastern canada
or new england.
Irving Oil products by many are considered top notch, lots of truckers

Best Auto Repair Software / OBDII Code DB
Autotree Pro Ver. 1.45 is a 32 Bit ( WIN95-XP) software Application
for automotive diagnostics. The program written in a Tree format to
make systematic and quick diagnostic checks a breeze, organized by

I just bought a used 94 Waldoch conversion with a rear heat/ac unit by
Pro-Air.  The rear heat and a/c work just fine.  However, when I turn
a/c off and set control to VENT and temp to COOL and turn rear fan ON,
then WARM air comes out of the rear blower.   Is that normal?

my nephew brought his 02 F250 over today, saying the front hubs were siezed
again.
when he bought it in the spring, i noticed it was i 4 wheel drive. it seems
the previous owner locked the hubs when he bought it, and left them locked

I'm looking for a layout of the fusebox for a 1993 ford Taurus (3.0L)
The Ford Fleet site goes back to 1996, but I need 1993 as the fusebox
layout is much different. Any suggestions?

I recently tried to remove the starter on my 1999 Ford Taurus 6cyl
OHV.  There are supposed to be two bolts holding the starter on.  The
first bolt was easily removed.  However the second bolt hole had no
head protruding.  There is something in the bolt hole.  I don't know

My oil light comes on peroidically.  I know there is enough oil in the
crankcase-- so it can't be from lack of oil.  I don't change my driving
speed when the alarm sounds and there is no evidence of knocking of rods
or main bearings.  I think it is a defective switch.  Thats my ...

Just replaced the Trans Oil and filter and also drained the
Torque Converter. It seemed like the torque converter just
didn't want to fill. I followed the Haynes manual and let
it high idle for a while and it still didn't want to fill.

I was surpised to see the 5000lb Explorer 6cyl costs more to drive than the
F150 V8 on a yealry basis. I guess it makes sense, more powerful engine...

I am clearing out my shop and I have a bunch of Ford stuff, mostly Mustang
64-1/2-73.  Nothing big, emblems, decals, scoops, export braces, etc.  I
started listing the stuff today-
http://motors.search.ebay.com/_W0QQsassZgreaseQ5fmonkeyQ5f42

FOR SALE
25th Anniversary Ford Mustang GT 5.0 Convertible
Nearly Completed Restoration Project Car
! ! ! NEW PAINT ! ! !

I am repairing my daughters Cougar. Blown head gaskets cracked heads etc.
I purchased some nice rebuilt heads from a dealer on Ebay. The heads are
the same except for a small hole that connects the exaust to the intake.
The hole is in the intake manifold surface with one on each ...

My son drives a 93 Taurus 3.0. We put new head gaskets on it about six
months ago. Started OK. Seemed to run OK around the neighborhood but he
never really tried to get out on the highway with it.
About 2 weeks ago he mentioned that it starts OK, but after about 3 miles it