when driving i here a humming noise any ideas any one

'94 TBird LX V8, 67k mi.
When I start it in the morning, I hear a very hi-pitched whine/squeal from
area of motor while car is parked. Been going on for quite some time.
I've replaced the belt-tensioner and idler pulleys. With new bearings in

Ford eyes smaller F-150 cousin
Pared-down pickup would boost CAFE
DETROIT - Ford Motor Co. is developing a lightweight, more
fuel-efficient pickup truck to slot in below its flagship F-150.

Perhaps it's a good thing that Ford decided to exit the minivan segment. The National Highway Traffic Safety Administration has launched an investigation involving Ford Windstar minivans produced between 1995 and 2003 due to a possible fire risk. The investigation is linked to ...

I had the hi-pitched squeal when starting '94 TBird LX V8. Appears to be
the idler-arm pulley bearing. A long time ago, Lugnut was good enough
to render tips on bearing replacement. I'm way behind the time curve,
but ...

Just a heads up to some of you Mustang fans, I'm not the seller, I
just happen to come across this and frequent the group a bit. Maybe
someone can turn a cheap car like into something cool:
<center><table width="650"><tr><td><div style="display: block;"><h1

Hello Dudes! I've found a certain site here on the internet which has
lot of racing stuffs to choose from. And I tried purchasing from them
too. At a very affordable price and with a free worldwide shipping.
That's not all, they have a wide variety of items to choose from,

does anybody here know if the 2006 ford fusion requires a special tool
to compress the caliper pistons back in when changing the breaks?
also what type/size are the caliper bolts.
i have been searching on the internet and haven't found much

I have a 94 Crown Vic with 4 wheel anti-lock disc brakes. While
sitting at a stop light with my foot on the brake I notice that the
brake pedal very slowly goes to the floor. Is this a defective master
cylinder?

If you got to make the ultimate road trip (and money, geographic
location of the trip and the make / model of the desired car you'd
most want to use wasn't a limitation), what things or person/s would
you most want to take with you and please say why.

Last fall I bought a used 1990 F150.  It ran fine all winter.  Now
we're getting warmer weather, and after I drive the truck for a half
hour or so, it refuses to turn over, or turns over so slow it's
rediculous.  Once the engine cools, it starts right up.

I have a 1990 F150 pickup.  I know the power steering fluid is low
from the noise.  The cap is a plastic thing with 2 fins to turn.  I
have tried and tried and it will not come off.  If I push on those
fins any harder they will break off.  WTF is with this thing?  Who

Brembo 4-piston brakes come on all four corners with 14.2" rotors up
front and 13.8" rotors in the rear. ABS is also standard to aid in the
stopping power and enables quick inputs from the driver...
http://tbmcars.googlepages.com/introducing_2008_dodge_challenger

I have a 1994 Ford aerostar. I bought it used in the winter. The AC works,
but no matter where I put the selector switch, the air comes from the
defroster vents by the windsheild and the heater vents by the floor. It has
to be in the switch or there is a door in the ducting that ...

I want to change radiator and heater hoses on my 99 Taurus 3.0/Vulcan.
Normally this type thing is pretty simple, but on this car it looks
like a
real mess.  The radiator appears to be hidden underneath part of the