| Thread | Last Post | Replies |
|
| I want to change radiator and heater hoses | 14 May 2008 18:50 GMT | 5 |
I want to change radiator and heater hoses on my 99 Taurus 3.0/Vulcan. Normally this type thing is pretty simple, but on this car it looks like a real mess. The radiator appears to be hidden underneath part of the
|
| How Does A Car Run on Water? | 14 May 2008 10:22 GMT | 4 |
Are you interested to find out how you can have your car running on water? http://tbmcars.googlepages.com/car_running_on_water_is_water_4_gas_scam
|
| A 21st-Century Model T? Ford Kicks off Design Competition | 14 May 2008 09:02 GMT | 1 |
Affordability is the key for the new take on what Henry Ford dubbed his "universal car." The post-millennial Model T must have a "base target price of only $7,000." Read More: http://www.edmunds.com/insideline/do/News/articleId=126259 ----------------------------------- Ford NewsHub ...
|
| Ford tarus 2000 | 13 May 2008 21:22 GMT | 2 |
Is it easy to install the monroe’s quick struts more so are the old one’s easy to come off, do I need spring compressor to take old strut and spring off the vehicle. Thanks
|
| Replacing power antenna mast on 1998 Explorer | 13 May 2008 19:55 GMT | 1 |
Good morning. The power antenna mast has been snapped off from my 1998 Explorer. What is involved in replacing this? Will I need to access the antenna unit from inside the fender?
|
| I have a 1997 Ford Taurus Wagon and the belt | 13 May 2008 07:30 GMT | 1 |
I have a 1997 Ford Taurus Wagon and the belt started shredding. I had a friend look over everything and nothing appeared to be loose. I have 71,000 miles and have never replaced it. He put a new belt on and it seems to work fine. However, he said the tensioner could be
|
| there is a much easier and safer way. | 12 May 2008 21:51 GMT | 1 |
there is a much easier and safer way. just don't text.DUHH oh, and by the way a.shole, what does this drivel have to do with fords??
|
| 02 Stang auto -- stalls going from R to D | 12 May 2008 15:28 GMT | 3 |
Old man has an 02 automatic mustang gt, 4.6L When going from Reverse to Drive (Or the opposite) the RPM's die down and it stalls at times... Any quick fix for this? It has new plugs just last summer before he put
|
| Tensioner Question | 11 May 2008 17:22 GMT | 5 |
I have a 1997 Ford Taurus Wagon and the belt started shredding. I had a friend look over everything and nothing appeared to be loose. I have 71,000 miles and have never replaced it. He put a new belt on and it seems to work fine. However, he said the tensioner could be
|
| Maintenance schedules? | 11 May 2008 03:38 GMT | 14 |
2002 Ford Taurus, what is/are the maintenance schedules for changing things like the oil/tranny fluids? Also, what oil weight? Like 20/50 5/30 etc?? Also how do I know if I have 'green' or 'gold' engine coolant? How
|
| 2004 Mercury Sable LS - Known Issues? | 10 May 2008 14:27 GMT | 2 |
I just acquired a very low mileage 2004 Mercury Sable LS with the 3.0L DOHC (Duratek) engine. I have always been a shade tree/weekend mechanic Do-It-Yourselfer and have worked on a number of other family vehicles, but in nearly 35 years of car ownership, this is my first Ford ...
|
| Where stat Taurus 2002 SES? | 09 May 2008 21:36 GMT | 2 |
Is it off the lower hose or up on the engine? Any tips on replacing one?
|
| 1987 Ford Ranger 2.9L Sporadic engine mis-firing, idles ruff and then OK | 09 May 2008 00:24 GMT | 4 |
I have a 1987 Ford Ranger and sometimes when you start it up (hot or cold) the engine runs so ruff that it feels like only three of the six plugs are firing. The engine shakes so hard that it feels like it's going to jump right out of the truck. Then after a while it starts to
|
| Where is drivers door open switch on '99 Taurus | 08 May 2008 06:37 GMT | 3 |
I've got a '99 Taurus Wagon. Recently the door open light has been on in the dash, but as far as I can tell all the doors are closed properly. When I lock all the doors manually the drivers lock button pops up right away, after a couple of minutes the drivers door will
|
| camshaft synchronizer install | 08 May 2008 06:30 GMT | 1 |
I am replacing the head gaskets on an 01 Taurus with a 3 liter engine. I pulled the camshaft synchronizer with out marking it correctly. I had the exterior marked, but not the internal. a fem minutes later, I put it right back in. I have not put the heads back on yet. I do not
|