Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Ford / Ford Cars / August 2008

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Replace Stereo in 1993 Grand Marquis14 Aug 2008 04:31 GMT2
The original AM FM Cassette stereo in my 1993 Grand Marquis dies.
It was on, then got gradually more full of static, and now doesn't
work at all.
It turns on, and the displays works, but no sound.  Not from the
did you ever notice??12 Aug 2008 00:30 GMT1
did you ever notice that if the poster's email address is from g-mail or
hotmail, the post spam??
1996 Mercury Sable.....  ignition/shifter iterlock - no brake lights10 Aug 2008 22:25 GMT9
I apologize for a question on a Mercury..but seeing how it's basically
a Taurus ...
My mother in law gave her 1996 Sable to my son.  Two problems ...  no
brake lights and the shifter will not move out of Park after the engine
Electronic noise09 Aug 2008 19:10 GMT13
Hey guys...  what could cause a constant, and annoying electronic buzz in my 1993 5.0. The previous owner installed an aftermarket stereo, tach, etc, but I really don't think that is it.
The noise is constant when the car is on. Doesn't go away no matter what you do inside the car ...
1997 tarus engine removal.08 Aug 2008 03:11 GMT19
Can you remove a 3.0L Vulcan engine on a 96 Taurus out the top without
dropping the subframe?
To do so, you would have to disconnect the trannie and move the engine
over to the passenger side enough to separate the two?
Oil Pressure on a 1995 F15007 Aug 2008 14:21 GMT3
My wife has a Ford F150 4 wheel drive with 302 auto.  The truck Oil pressure
gauge indicates the pressure drops to a very low reading.  It drops like a
rock and just as quickly come back up.  The temp is fine and it seems to be
running properly.  I assume this can not really be ...
Underbody AC lines for rear air07 Aug 2008 01:37 GMT32
couldn't find a Usenet group about auto AC.
It's an Aerostar so I'll ask here.
The lines are rusted through. No one has replacement that I can find.
Having some custom made is ridiculously expensive.
Will Ford Need to Sell Its Stake in Mazda?05 Aug 2008 22:22 GMT2
Will Ford Need to Sell Its Stake in Mazda?
http://tinyurl.com/6n9csc
Just a week after Ford's (F) disastrous quarterly earnings announcement
on July 24, (BusinessWeek.com, 7/24/2008), Mazda (MZDAF), the Japanese
Consumer Reports reliability survey for Cars03 Aug 2008 05:19 GMT44
I was surprised to read that the 2 bottom trim levels of the
new Passat do not come with automatic headlights.  You have
to spring for the third trim level (called Lux) to get the
automatics.  Kinda surprised me.  All trims are turbo, though,
Ford: U.S. sales off 14.9 percent; SUV sales fall 54.4 percent02 Aug 2008 17:50 GMT3
Ford: U.S. sales off 14.9 percent; SUV sales fall 54.4 percent
http://www.msnbc.msn.com/id/25968649/
DETROIT - Ford Motor Co said on Friday its U.S. sales fell 14.9 percent
in July on an unadjusted basis amid the downturn in the U.S. auto
Great Tip on How to Beat Fuel Prices Using Water02 Aug 2008 17:43 GMT2
A conversion to a water fueled car is not expensive and it is not so
difficult to achieve.
http://carwithwater.googlepages.com/beat_fuel_prices_using_water
Flickering lights caused by multifunction switch02 Aug 2008 07:04 GMT1
Need repair advice. 1995 Lincoln Mark VIII. The harness plug that
plugs in the multifunction switch got hot and is now deformed it got
so hot. I guess I have to find out what caused the problem first.
Fixing the problem looks insane. So many many wires go in the harness
Engine too loud after head work and lacks power02 Aug 2008 02:36 GMT3
I posted earlier this year after I had my 250 4.1 head machined and grinded.
The engine was overheating and had no power.  I suspected that the machine
shop did something wrong but I found that they did everything correctly.
However, the engine is now too loud.  When idling the ...
Pages: 1 2 3 July, 2008
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.