| Thread | Last Post | Replies |
|
| Leaking intake manifold questions - 97 Bonneville | 26 Mar 2005 02:03 GMT | 10 |
I removed the upper intake manifold from my 97 Bonneville today to replace the leaking gasket, and I'm a little concerned about all the gunk I found under the manifold. This is the first time I've taken an intake manifold off (I knew it would be a learning experience), so I'm
|
| Intake manifold repalced. Should the oil have been changed as well? | 26 Mar 2005 02:00 GMT | 9 |
Two weeks ago, the intake manifold gasket on my car was replaced (which was about a month after my last oil change). As far as I can tell (no line item appears on the work order), the dealer did not change the oil when this work was done.
|
| Ideas for console light | 25 Mar 2005 23:07 GMT | 2 |
My 2002 PA armrest cupholder broke, since they are really flimsy I decided to buy a floor console with adjustable cup holders. It is fairly dark down there at night so I would like to install a very low light of some sort. Any ideas?
|
| GM Hurtin' - GM HEALING!! | 25 Mar 2005 22:23 GMT | 1 |
I have have heard a lot about this issue lately and believe that General Motors CAN and WILL turn itself around. And I will use an example of how: Toyota. Simple, isn't it??
|
| 2000 Suburban body style | 25 Mar 2005 21:38 GMT | 2 |
How can I tell if my 2000 Suburban is the "new body style"?
|
| Fuel Mileage: What was GM thinking?!!! | 25 Mar 2005 19:22 GMT | 11 |
With gas prices up and GM sales declining, I can't understand what their engineers were thinking when they designed the new Saturn Ion and Chevy Cobalt. These are nice cars, BU T: With automatic transmisssions, they get LOWER
|
| Opinions wanted on shuddering TH-350 trans | 25 Mar 2005 15:59 GMT | 1 |
Recently had the TH-350 in my 1975 Chevy truck rebuilt. (Was driving on the freeway, heard a "fweeeee!" and no power to wheels.) I'd have done the job myself, but was quite a ways from home, so had it towed to a transmission shop local to the area.
|
| 2000 Grand Am GT Brakes | 25 Mar 2005 14:53 GMT | 3 |
I just replaced the front and rear brake Pads and rotors when I went to apply the brakes the peddle was softer then when I changed them, any suggestions why Mike
|
| 95 Cavalier Remote entry programming | 25 Mar 2005 03:22 GMT | 2 |
Any one know how to programing this cars fob? Thanks, Dan. ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
|
| Service Engine Soon/Temp Light | 24 Mar 2005 17:32 GMT | 4 |
my 1990 buick century this morning while driving on the highway, the service engine light and the temp light came on at the same time. it felt like the car downshifted and i released the gas, both lights went off... i wont have a chance to get to autozone til the weekend for
|
| 2003 GMC Sierra, Passenger Door Electronics dead | 24 Mar 2005 02:27 GMT | 5 |
Anyone know what cause the passenger door electronics to go dead this would include door lock door lock switch
|
| '01 Grand Prix MAF problem | 24 Mar 2005 01:19 GMT | 2 |
I have a '01 Grand Prix GT with a 3800 and a check engine light. When idling, the RPM swing from <1000 to 2000 with the car dying occasionally. The code reader I borrowed from the auto parts store gave code P0102 - Mass or Volume Air Flow Circuit Low Input. I've
|
| GM hurtin'..... | 23 Mar 2005 23:32 GMT | 18 |
Aw! Too bad, my heart bleeds! After my experience with GM and their dealers late last year with the paint lamination problem (flaking off like dandruff) I have no sympathy. This stock and the company behind it deserves to shrink into
|
| 1991 Riviera factory alarm | 23 Mar 2005 04:58 GMT | 2 |
I just discovered the hard way, I have factory alarm on the 1991 Buick riviera I just bought. I can engage it buy pressing the electronic lock on the door twice. Disengaging is the problem. How do I turn the alarm off?
|
| How many qts of trans fliud do I add | 22 Mar 2005 21:43 GMT | 4 |
flushing a 2003 cav transmission. After I drain it - how many qts do I put in? Help
|