Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / GMC Cars / March 2005

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
firing order11 Mar 2005 23:07 GMT4
98 monte 3.1, can anyone tell me cylinder location.......left to right,
front three.....rear three while facing from the front
90 Chevy Lumina rear disk brake help!!11 Mar 2005 22:16 GMT10
I've been fighting these rear disk brakes all night.
According to my haynes manual, they are like most rear disk brakes. Turn the
piston, and it should retract into the caliper.
Well .. this time, it's wrong! I can spin the piston, but it doesn't seem to
bad fuel economy11 Mar 2005 18:26 GMT3
I have a 1986 Oldmobile Delta 88, 3.8L fuel injected V6.
It has been very reliable.  But my fuel economy has become
noticeably worse.  When i start the car the idle is really high,
even when the engine is not cold. It lowers after a few minutes
1980 Chevrolet Caprice: transmission slips in reverse11 Mar 2005 04:17 GMT11
The transmission seems to slip when going in  reverse in
my 1980 Chevrolet Caprice (OK going forward). Transmission
fluid is OK.
Is there anything one can adjust--or does the transmission
Expansion joint?11 Mar 2005 01:55 GMT5
My sister's '94 Cutlass Ciera S with 4-cylinder engine appears to have a
mesh expansion joint in the exhaust pipe about halfway between the engine
and the catalytic converter.  It's leaking badly.
Looks like it's welded in.  Should it be replaced in kind or can a piece of
Save the EV1 - ARTICLE11 Mar 2005 00:54 GMT1
I will advance o opinion on this; I am just posting the article for your
reading pleasure (?).
Activists fight for electric cars
Enthusiasts mount California vigil to save EV1
Leaking Intake Manifold Gasket on 5.7L10 Mar 2005 22:05 GMT4
What's the best way to check if mine is leaking?  I have a 96 GMC Sierra
5.7L.  After reading some posts about them leaking, one of my symptoms is
rough idle.
oil pressure on sonoma10 Mar 2005 20:15 GMT1
I have a 2001 GMC sonoma, 5 speed..
Is it normal for the oil pressure to go up and down with the RPM, or should it stay around 50 psi ?
//\\
we must not allow ourselves to think that this should be come a war of "our kind" vs "their kind"..For "our kind" is capable of great horror ...
1999 Pontiac Grand Prix coolant problem10 Mar 2005 18:24 GMT6
Here is the deal. My son bought car and found full of bars leak. We were
told intake gasket was bad and
had it supposedly changed, doesn't look like it was apart to me but I know
nothing. Car still uses
ILL State Troppers Every 5 MIles on ILL Tollways.10 Mar 2005 17:32 GMT5
This weekend ILL State Troopers will be spread out about 5 miles apart,
all over the IL Tollroads to crackdown on speeders. Friday 150 speeding
tickets were issued. Average car speed on I - 294 north was clocked at
89 mph in a 55 zone according to one report on the 10 o'clock news.
Making Aux power always live10 Mar 2005 16:44 GMT3
On my 2002 park ave there is a aux power outlet on the right front
corner of the driver seat as you sit in the seat. It is right by your
right leg if you are sitting in the drivers seat. The power seems to
turn off after a while and it doesn?t charge my cell phone. How do I
Fiero Butt Wiggle10 Mar 2005 04:35 GMT2
Hey all,
Got a weird one.  I have a 1986 Fiero 2M4 with 72,000 miles.  During
hard braking, the rear slides to the left.  It does not come around on
me.  The car still tracks straight, just moves to the left a few
02 Blazer radiator drain10 Mar 2005 04:21 GMT5
Does the drain plug requires a special tool to open or is mine broken
off? I had work down on the front end recently at the dealer.
Yesterday I tried to drain some coolant to replace my thermostat and
found there is just a  3/8 inch plastic nub for what I assume is the
High REVS in Port-Fuel-Injection10 Mar 2005 02:12 GMT1
I have a 1986 Oldsmobile Delta88, 3.8L, V6, port fuel injection.
I posted earlier that my fuel economy has gone down very
noticeably.
One thing is that i notice that the revs are really high.
General Motors Dex-Cool problem10 Mar 2005 01:40 GMT5
There appears to be an issue with GM's Dex-Cool engine coolant. Consumers
have had problems with the cost of repairs as a result of the Dex-Cool
antifreeze not working as it was supposed to.  If you check out
http://www.lawyersandsettlements.com/case/dexcool2 they have the ...
Pages: 1 2 3 4 5 6 7 8 9 February, 2005
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2010 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.