| Thread | Last Post | Replies |
|
| Engine knock - piston slap? | 25 May 2005 07:30 GMT | 5 |
My 2001 Malibu V6 knocks for about the first 10 minutes when cold. I think it is called Piston Slap. Can anyone please tell me more about the problems this creates and what can be done to minimize any damage.
|
| 89 S15 Fuel Pump Fuse | 25 May 2005 03:57 GMT | 2 |
Does anyone know where the fuel pump fuse is located on a 89 GMC S15? Truck would not run one morning last week. Noticed that the fuel pump was not running, couldn't hear it. Checked all of the fuses in the fuse block under dash - all good, even though none of those is labeled for ...
|
| OVERHEATING | 25 May 2005 00:24 GMT | 5 |
hey i have a 1994 2.2 cavalier and it keeps overheating.. i change the thermostat, and that didnt solve the problem, there is no coolan in the oil so i dont think its the head gasket.. the waterpump seem to be circulating the coolant, as the level in the radiator fluxuate
|
| Radio Problem | 24 May 2005 22:29 GMT | 4 |
I plugged in an ac adapter into the 12V cigarette lighter of 1991 GM Jimmy. When I did so, the radio shut off, now all I get is stai coming from the speakers. No display on the radio itself. Fuse seem to be OK. Need help PLEASE
|
| 96 Cavalier Z24 (horn) | 24 May 2005 19:28 GMT | 1 |
Horn stopped working over the weekend. Now all I get is a clicking noise on the right by the glove box. I went searching for the noise. Did the whole standing on my head routine on the passenger side. Found some kind of box.
|
| Disabling Daytime Running Lights | 24 May 2005 02:20 GMT | 74 |
Love my new 2002 Buick Century Limited, but I'm unaccustomed to th Daytime Running Lights Is it possible to disable these Is it legal " " " ?
|
| 1990 buick lesabre passenger mirror | 23 May 2005 21:59 GMT | 3 |
the mirror on the passenger side seems to have gone awol. The motorized piece behind it is still there with two/three holes in it which probably moves the glass. Question is can you buy a replacement mirror and it will have tabs on
|
| Timing pointer on an '86 305... How to read?? | 23 May 2005 17:09 GMT | 1 |
The timing pointer on my '86 305 is on the top of the timing chain cover. It is in a jagged shape with 4 points on it. I do not see any marks on those points. There is only one mark on the balancer which I assume is for TDC. The specifications sticker says 0* timing, which is ...
|
| 2002 monte SS | 23 May 2005 16:46 GMT | 4 |
Just an FIY I bought a 2002 monte, and about a month ago noticed it didnt seem as fast as it should be, and when help to the floor, it would hit redline, and not shift up. Well it kept getting worse and would do this no upshift bit at
|
| 93 GMC VANDURA 3/4 TON VAN (ELECTRICAL PROB.) | 23 May 2005 05:32 GMT | 2 |
I STARTED UP MY VAN ONE MORNING TO FIND THAT MY RADIO NOR MY INTERIOR LIGHTS WILL WORK. I CHECKED ALL OF THE FUSES ON THE FUSE BOX TO STILL NOT LOCATE THE PROBLEM. I TRIED TO LOOK THROUGH MY MANUALS ELECTRICAL DIAGRAMS TO SEE IF I COULD FIND OUT IF THERE WERE SOME IN-LINE FUSES ...
|
| Republican Ripoff | 23 May 2005 01:15 GMT | 1 |
Collins & Aikman Products Corp. Former CEO of the company David A. Stockman has quit his postion and given a tidy 20 Million Dollar going away present for his gallant efforts to ruin the company. Shortly after his "retirement" the company is forced to file bankruptcy and now is on ...
|
| Engine problems | 22 May 2005 22:25 GMT | 3 |
I have a 99 Pontiac firebird which was recently shipped to Germany from the U.S. Before I shipped the car it was fine, when I went to pick up my vehicle and started it up the first time after a couple of weeks it was okay until I went to the gas station. After I filled up
|
| Stockman..... UAW'S BEST FRIEND ???? | 22 May 2005 21:49 GMT | 1 |
Collins & Aikman Products Corp. Former CEO of the company David A. Stockman has quit his postion and given a tidy 20 Million Dollar going away present for his gallant efforts to ruin the company. Shortly after his "retirement" the company is forced to file bankruptcy and now is on ...
|
| 1995 Regal 3.8L - Crankshaft Bolt | 22 May 2005 18:14 GMT | 1 |
I am trying to remove the harmonic balancer to get to the crankshaft positioning sensor, Is the crankshaft bolt a left-hand or right-hand thread? What are the torque specification for tightening the bolt? Thank you,
|
| 1988 5.7l TBI idles @ 1800 RPM | 22 May 2005 16:08 GMT | 4 |
I recently purchsed a 1988 Chevy G 20 conversion van with a 5.7l TBI and TH 400 tranny. When I bought the van it was idling high and a friend of mine hooked it up to his Snap On scanner and got 4 codes, 15,22,44 and 45. I replaced the Idle Air Control unit, the ECT sending unit, the ...
|