| Thread | Last Post | Replies |
|
| '94 S10 CHEV TRUCK | 28 Aug 2005 01:29 GMT | 1 |
This truck has a 4.3 litre vortec engine. Whenever it has been shut off for a couple days, it would not start unless injector cleaner was sprayed into the intake. The problem is getting worse and is now hourly. The fuel pump has 50lbs. pressure as soon as the key is turned on.
|
| Engine Code | 27 Aug 2005 23:32 GMT | 1 |
Service engine light is coming on when load is applied to 1995 3.4 V-6 engine with 64k miles in a Chev. Lumnia sedan.Service engine light stays off at idle rpms.
|
| Is this possible? | 27 Aug 2005 16:37 GMT | 4 |
My car is 1989 Chevy Cavalier RS. I want to take a 1989 Chevy Cavalier Z-24 engine into my RS. Do you think it can be done? Because my car just has a 4-clinder 2.0L the RS! And the Z-24 models have V-6 2.8L!!!
|
| 1996 chevy truck | 27 Aug 2005 16:31 GMT | 5 |
my truck almost turns off by itself when traveling at a speed of 99+ my truck could never travel at a speed of 99+? well I got a ticket saying I was traveling at a speed of apox.100mph. Well I need to take in documentation to the judge showing him my truck retards at 99+mph does
|
| GMC Jimmy Seat | 27 Aug 2005 14:22 GMT | 2 |
1998 GMC Jimmy with the drivers leather seat has a wear spot from getting in and out of it. I am off work on disability so money is a problem. I hate to get a cheap Wal-Mart type seat cover. I have looked at the seats and it appears I could swap the front seat and make a quick ...
|
| GMC 1995 Vandura 2500 HELP!!!!! | 27 Aug 2005 13:58 GMT | 17 |
Replaced break system 3x's, from master cylinder, power booster down. Front breaks lock after 10 miles of driving, I have to wait for them to cool down before I can drive it. Again only 10 miles. Can not figure this out. Has a diesel break system, but runs on gas???!!!
|
| injector resistance | 27 Aug 2005 01:40 GMT | 10 |
My 2.8 mpfi (1988) injectors' resistance is supposed to be 12.6 ohms max. Only one of mine is 12.6, all the others around 13(!) The ohmmeter zeroes out ok. Looking for a steady miss which I've ruled out the cause to be
|
| Key Fob Programming | 26 Aug 2005 02:22 GMT | 2 |
I recently sent one of the key fobs (# 2) of my '04 CTS through the wash by accident and need to purchase a new one. Buying the key fob is no problem, but I'd rather not pay the dealer to do something I could do myself. On my '92 Bonneville, I had to jumper 2 ports under the dash ...
|
| FS: SIN CITY Corvair Actual Picture Car | 25 Aug 2005 18:37 GMT | 2 |
Due to a non-paying bidder, the SIN CITY Corvair is back on e-bay motors. This is the actual car used in the film, there is a production still showing the car on the auction. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=4568835358
|
| Bonneville Electrical Question | 25 Aug 2005 18:09 GMT | 6 |
Hey all. I am having a very weird problem with my 1996 Bonneville SE. A few days ago, my Power Locks, Power Antenna and Interior Lights stopped working, all at once. I could sit in the car and hit the power lock button and it would *attempt* to lock the doors, but it was as if it ...
|
| Cheap Repair Manuals versus cheap CDs... | 25 Aug 2005 02:34 GMT | 5 |
I'm guessing the CD has more info than the books. BUT I think someone is supplying VERY extensive repair material online, and it is probably pricey!
|
| 2001 Century Custom, Wheel Bearings | 25 Aug 2005 02:31 GMT | 4 |
I've recently been told a Wheel bearing is just starting to show some slop. I have a feeling this is a bit more work than my older cars with bendix brakes on the front. Question is how much more work?
|
| Throttle Position Sensor | 25 Aug 2005 00:50 GMT | 2 |
OK - I have a '86 chevy capric classi with a 305 in it - slowing getting it running good - am getting a error code that says the throttle position sensor is bad - have replaced it - still get the same code.
|
| Weird car noises | 24 Aug 2005 22:20 GMT | 3 |
Hello, I have a 2001 Intrigue, and have been having some problems with it. I have gotten new brakes put in by Firestone about 3-4 mths ago. Just recently, I have been hearing some weird noises coming from the front passenger side. The noise is more like a motorbike running next
|
| 99 Park Avenue front end noise | 24 Aug 2005 19:39 GMT | 1 |
any park avenue owners have problems with a popping sound or knocking noise in front end when going over bumps. I have had the engine mounts replaced, new front struts with no luck. Any ideas, Thanks
|