| Thread | Last Post | Replies |
|
| Abnormal alternator output fluctuations? | 04 May 2006 12:02 GMT | 3 |
I'm now thinking there may be a more pervasive electrical problem causing the Herky Jerky symptoms (chuggle). The system voltage always shows up kind of ragged in the scans. Take a look at this:
|
| Run with EGR valve disconnected? 95 Park Ave Ultra | 04 May 2006 06:03 GMT | 6 |
Is there anything wrong with temporarily disconnecting the EGR valve connector? I'm trying still trying to diagnose my "Herky Jerky" problem, and wanted to see if the
|
| Help!!I need to tune up the 350 engine in a 1990 Suburban | 03 May 2006 17:36 GMT | 1 |
Folks, it has been 5 years since I had the old 1990 Suburban tuned up, and it needs a tune up again. Does anyone have any advice regarding what brand/type of plugs to use? Should I use some sort of anti-seize grease on the plug threads when I put the new plugs in, and some
|
| 3.3L GM motor | 03 May 2006 02:55 GMT | 3 |
I am trying to find out if the G M 3.3L motor used in early 1990's models would use some of the same replacement parts as the 3.1L motor. The reason for this silly request is I am trying to find a accessory belt tensioner assembly for the 3.1L motor to no avail. If this is the ...
|
| Here is something that is going to be VERY BIG... ! | 02 May 2006 21:58 GMT | 3 |
Here is something that is going to be VERY BIG... ! You can get a free position now and start promoting... This is about to launch but if you get a group built now you will beat the crowd and make a killing!
|
| Cavalier dash problem solved | 02 May 2006 21:35 GMT | 1 |
Here is a weird one. First some background: Left my Cavalier sit a while and the battery went dead. Hooked up a slow charger and let it sit all night. Next morning the engine started right up, but no dash. No tach, no gages, no odometer, no warning lamps except the theft lamp. So I ...
|
| transmission 2000 chev impala | 02 May 2006 21:21 GMT | 1 |
started last Thursday after the car was warm,whining sound coming from the transmission and shifting hard. Transmission shop says after doing road test and plugging their scope into it that a couple of different codes are showing up (didn't tell me which ones) but what it boils down
|
| ABS Light 98 Jimmy | 02 May 2006 20:21 GMT | 7 |
The ABS light came on today while driving my 98 Jimmy. When I shut it off and restarted it was off but came on shortly after driving a couple blocks. I have no idea what to look for. Any ideas.
|
| 2004 Grand Prix PCM Pinout | 02 May 2006 19:55 GMT | 2 |
I need to know the color and position of the VSS (vehicle speed sensor) on the 2004 Grand Prix PCM. Please help if you can! Thanks!
|
| 2004 Grand Prix ECM | 02 May 2006 16:34 GMT | 2 |
I'm installing a navigation radio in my 2004 Pontiac Grand Prix GT and cannot find my ECM. Can someone PLEASE tell me where it's located? Thanks! Thomas
|
| help with 1994 Regal GS | 02 May 2006 14:39 GMT | 3 |
Can someone PLEASE tell me where to find the fourth fuse panel on this car? The other 3 boxes are so simple to find, but of course the fuse I need to check is in the 4th. The manual says only that it is located under the instrument panel - sure can't find it!
|
| Question re: 1969 Chevy Nova | 02 May 2006 04:59 GMT | 2 |
I once owned a 1969 Chevy Nova. It had a L6 engine and an auto. trans. I was wondering if anyone has a reference book or is on a data base and as a result can answer the following question: What is the HP of a 1969 Chevy Nova--L6 engine--auto trans.?
|
| Some General Motors vehicles outrank Toyota's | 02 May 2006 02:19 GMT | 43 |
http://www.freep.com/apps/pbcs.dll/article?AID=2006604100374
|
| Why is this group dead? | 01 May 2006 17:41 GMT | 12 |
This group is dead because General Motors doesn't have the decency to post comments, ask for suggestions, and answer posts. Posters represent the most loyal faction of the automotoring public. Who else will take the time and energy to post? Posters are GM's friends.
|
| 1995 s10 manual transmission | 01 May 2006 12:20 GMT | 1 |
How do i take out and install a transmission on my own? I have worked on cars but i do not know how to do this on my own, can someone help? Allison
|