Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / GMC Cars / June 2006

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
How to remove gas from tank?22 Jun 2006 23:41 GMT7
1992 sunbird.  To be towed away as scrap.  Engine died with 3/4 tank full of
gas and I want to salvage the gas.  Siphon hose won't go down into the tank.
Is there a trick to this?
Does Anyone Make a Kit for a Pontiac G6/ Hyundai Engine Swap?22 Jun 2006 23:24 GMT9
I was thinking of ordering a G6 GTP Convertible with the 3.9 227hp Engine.
I also know that Hyundai offers a smaller v6 that they use in the 2006 Azera
SE family Sedan.
That Hyundai 3.8 is a 24 valve 263 hp with 255 lbs of Torque. Its a smaller
Rag Joint22 Jun 2006 11:52 GMT7
I need a rag joint for my 1984 gm 1 ton pickup.  The dealer wants quite
a bit.  Who else might have that part?  Places that sell after market
parts ETC. don't stock these.  I guess I could try a wrecker, but would
like to have a choice.  Maybe a place that rebuilds power steering ...
NP208 or NP205?22 Jun 2006 10:22 GMT2
I have a 1986 chevy k10.  Just wondering how I tell the difference
between the NP208 and the NP205?  I am not sure exactly which transfer
case I have.  Any knowledge would be greatly appreciated.
1978 Buick Regal- how many miles are they good for?22 Jun 2006 03:36 GMT7
I have a 1978 Buick Regal with a 3.8l 231cc Buick V6 and  150,000 miles
on it. I'm facing some costlyish repairs (tires, shocks, muffler,
brakes) and I guess I'm wondering in the long run how much money its
worth sinking into the car.  I'm guessing some people here have had
Can the crankshaft be removed from a 4.3 with the motor in?22 Jun 2006 00:10 GMT3
Can I take the crank out of my 98 astro van without pulling the motor?
Thanks.
1996 Beretta Stalled (won't start).21 Jun 2006 19:21 GMT23
I have a 1996 Beretta and while driving it, it lost power (stall) and cut
off. The only thing it does now when I try to turn it on is just a
clicking noise. Before it cut off there was no noise or anything, it just
shut off. Now it won't start at all. It's full of gas, the oil is ...
Astro Van21 Jun 2006 08:25 GMT4
 I have a 91 Astro Van when I went for my emission test the mechanic said
that my speedometer should read 5km under the speed which is actually posted
on my dash reading.
Does anyone know what could cause this.
99 Buick rattle21 Jun 2006 00:48 GMT1
My 1999 Buick LeSabre, 3800, no supercharger, 90000 miles has a loud
rattling noise in the front of the engine. For a week the noise came at 3500
RPM, it is now on at idle. It is continuous.
The engine stalled when making a left turn at 15 mph.
1970 Cadillac Eldorado: Exhaust 'flange' problem: help needed!21 Jun 2006 00:45 GMT4
I have a 1970 Cadillac Eldorado.
Exhaust needs repair as it is making excessive noise.
But I'm having trouble finding the right part to replace.
Reportedly: there is a leak -- not huge yet -- on the right side
chevy II20 Jun 2006 18:46 GMT4
My neighbor has a 63 chevy II/nova and he asked if I wanted to buy it
for $500 to get it out of his yard (hes moving).  It is 4-door, 6cyl. ,
automatic trans.  Needs new exhaust, battery and new interior.  There
is some rust underneath but not too much.  Mostly in the crevices, the
1990 GMC Safari Steering wheel shake20 Jun 2006 17:09 GMT7
Greetings.  I am in need of some assistance diagnosing a steering wheel
shake in my Safari.  The steering wheel shakes in an up/down direction once
the vehicle reaches 67 mph and continues through higher speeds.  Here is
what I have done so far:
Oil Additives19 Jun 2006 23:06 GMT6
The lifters on my 2002 BUICK do a
click-click-click
when I first start up the car.
Years ago, this meant dirt ( or varnish ) in the lifters.
crazy Arabs, Attempted Arm-Amputation With A SUV19 Jun 2006 22:56 GMT1
Attempted Arm-Amputation With A SUV
http://www.jumpingpixels.com/suv.html
How do I know what gear ratio I have?19 Jun 2006 21:49 GMT1
I have a 1986 chevy k10.  I removed the front and rear axle, but want
to know what gear ratio I have in them?  I know you can look at the
sticker in the truck, but it was removed.  Does anybody know how to
check manually?
Pages: 1 2 3 4 5 6 7 8 9 May, 2006
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.