I've been asked to help a friend change her driver's door on a 93
Cutlass Ciera. I've generally only worked on Toyotas, which at first
glance seem a lot more straightforward.  Please could anybody tell me
the procedure for removal and replacement of the driver's side door.

Hello...I just replaced the valve seals in my 92 chevy pickup and i was
going through the process of adjusting the valves when I noticed I had
coolant leaking up through the valve cover bolt hole...could that be a blown
head gasket or possably something else...

I have read that the early W-body gm cars
(1988 - 1994) had problems with rear disc
brakes. I read that the only way for the rear
disc brakes to be properly adjusted, was to

Haynes pic is wrong. Other threads say its between alternator and AC
compressor..Can't see it ? Can it be somewhere else? Is it accessible
fron under the hood or do I have to crawl under the engine?

Can anyone tell me where I can find the power window relay in a 1996
Chevy Lumina v6? My son's girlfriend has this car and her powere
windows don't work from any switch. I've looked at the wiring harnesses
and fuses and everything seems OK there.

I have a 1987 cadillac fleetwood brougham (RWD),  I have 7 spark plugs
and wires done but there is that one I cannot get to screw in. Ive
tried putting a tap to clean and refine the screw heads in the hole but
it seemed not to work.  I need help.   What should I do

Does anyone know if there is anywhere to get a replacement roof/rain gutter
for an older van (1973-1978) or does it need to be fabricated? Also does
anyone have any experience with body work in Mexico?
Thankx

I was reading another older thread on her about someone that used JB
Weld on a cracked engine block.  They said it worked well on a HOT
engine.  Someone else said that JB Weld is rated to 600 degrees F.
OK, but will it work on an exhaust manifold?  I have one of the 3

Any advice on replacing front and rear struts for a 1995 Regal?  Has anyone
on this forum ever replaced front or rear struts?  Do I need any special
tools?  Can I use the weight of the vehicle to keep the rear traverse spring
assembly compressed?  I have the book, I am just not ...

Just recently my brakes went bad and I replaced the master cylinder. Now for
some reason I can't get the damn thing to shift out of PARK. It'll start up
nice but I'll be damned if I can get it out of park (and yes I am pushing the
brake while trying to shift). And I can't get the ...

just wondering how hard is it to change the fuel pump on a 95 gmc jimmy s-15 4x4,does any one have a diagraham on what is needed
Also are the fuel pumps the same for the older jimmys with the vortec in it
any help would be great
jame

From a recent Los Angeles TV station news segment:
http://www.nbc4.tv/video/9152183/detail.html

Post something to this board on how to fix something on a GM car
and you are lucky to get a response, but post an article on why GM
is failing and you get an endless number of replys.  Everyone just wants
to BS and no one figure out what makes these cars tick, if the opposite

Wheels Come Off Hummers H2
http://car-reviews.automobile.com/news/wheels-come-off-hummers-h2/2002/
Quite Literally.
Some would say the wheels have come off at GM. With the infamous

I recently purchased a leather replacment shift boot for our 1990
Chevy Cavalier. The boot fits and looks better than the factory boot.
I'm very pleased with the quality and service. Check out the web site.
www.redlinegoods.com  They have everything from Corvette to Volks.