Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / GMC Cars / September 2006

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
95 MONTE CARLO LS HEAD GASKET LEAK--NEED ADVICE30 Sep 2006 14:35 GMT9
Coolant is leaking into the passenger side rear cylinder--127000 miles
on car.  What's the best approach to take here to do the job once and
right.  Thanks.
1999 GMC Safari30 Sep 2006 01:30 GMT4
Jack writes,
Re: 1999 GMC Safari
Could you comment on the reliability and fuel consumption of this van?
What is a fair value on average, to buy privately?
3.1 V6 idle revisited29 Sep 2006 20:51 GMT7
I think I have the idle issues fixed , and my thanks go out to Shep . He
suggested cleaning the iac , which turned out to be kinda carbonned up . It
idles as it should now .
1988 GMC 4.3 1500 TRUCK STARTING RUNNING PROBLEMS29 Sep 2006 11:44 GMT4
I have a 1988 gmc truck 4.3 engine and about 2 weeks ago I pulled up to
a stop sign and it quit running it was about half way warmed  up,  so I
turned the key off and  it  restarted but it  was running kind of
weird.
CHEVY SILVERADO antifreeze leak28 Sep 2006 21:39 GMT4
               I have a problem with my truck(98 Chevy Silverado with
5.7) that I can't figure out, but every indication leads to the intake
gasket. Every time I start my truck, antifreeze is pouring, not
leaking, out. It is coming off the starter, but I'm sure it is coming
Wire Wheel Covers28 Sep 2006 18:10 GMT5
My '87 DeVille has these type covers and they rattle....loudly!  I've
tried JB Weld, plastic tooth picks and other attempted remedies, but
nothing seems to work.  The 'spokes' have fake adjusters like
motorcycle/bicycle wheels.  Has anyone had this same problem?  A fix?
Diagnostic software28 Sep 2006 03:34 GMT1
Is there any free OBD2 software out there that can change some of the
factory settings?
TIA
WHEEL  BEARING  PART  227 Sep 2006 00:46 GMT6
Thanks guys!!
Alot of good ideas and opinions.
The car runs other than the wheel bearing and strut,
excellently...good heat...no leaks, doesn't burn
2000 Chevy Impala Base  starting problems26 Sep 2006 21:41 GMT3
I want to share with those who have an impala 2000 and on. This prob all
started last sprring 05. I could use the car,and next time the car went
dead. Had the car towed in twice in one week to the dealer, and they
couldn't find the prob.A week later I was driving the car and the key ...
Chevy Venture 2002 fan problem26 Sep 2006 16:47 GMT9
I have Chevrolet Venture 2002 and when I turn hot/cold air fan on (to
blow inside the cabin) the lowest fan speed which is number 1 doesn't
work, all other (2, 3, 4 and 5 are working fine).  Does anybody know
how can I fix it?  I was told once that might be a fuse, if it's so
Ford F-150 198825 Sep 2006 03:56 GMT2
While driving down the road my 88 F-150 (5.0)EFI, started sputtering like
is was running out of gas and subsequently quit running. I had switched
tanks from the forward to rear tank about a 1-2 miles earlier so I quickly
switched back but it did not help. I checked the fuel line by ...
Is this the dreaded 3.1 head gasket problem24 Sep 2006 19:16 GMT19
2002 Buick Century with 3.1 V6
41000 miles
At my last oil change the GM technician reported:
"coolant low, has some oily residue in rad. Top up rad
Toyota moves to unseat GM, outpace Ford24 Sep 2006 19:03 GMT5
http://www.dfw.com/mld/dfw/business/15543603.htm
GM and Ford to began some sort of partnership24 Sep 2006 19:00 GMT5
I heard a 3 second blurb about GM and Ford possibly forming some sort of
partnership.  No details.  If it's extensive, they sure could save a ton of
money on R&D/production, etc..  Hate to see jobs get eliminated, but these
jobs would probably be eliminated anyway.  And if the 2 ...
Buick lesabre(single working moms car)seat belt  question24 Sep 2006 16:48 GMT5
My friend has a driver side buckle problem.The spring im guessing is
broken seeing when the male half is inserted(sounds sexual lol)in to the
buckle theres no clasp/locking.Question is if we get her one at a
salvage yard can we easily replace it?...is it a simple bolt connection
Pages: 1 2 3 4 5 6 7 8 August, 2006
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.