| Thread | Last Post | Replies |
|
| Incessant squeaking from overhead storage system | 01 Sep 2006 05:19 GMT | 2 |
My wife's '05 Montana SV6 has the overhead storage system with the dual rails running along the headliner. It squeaks almost constantly. The dealer has failed to remedy this problem. We're taking a 4 hour drive to upstate New York next weekend and I don't think we're going to ...
|
| I rented a Chevy Uplander | 01 Sep 2006 02:40 GMT | 10 |
I had to go to Dallas, Texas again and went to the usual rental car place. The only SUV-ish thing they had was a Chevy Uplander. I drove it home 25 miles and took it back to the rental place the next morning - traded it in on a Saturn VUE they just got back. I have absolutely ...
|
| 1992 buick roadmaster -- odometer does not work at under 60 mph | 01 Sep 2006 02:37 GMT | 1 |
Also fuel gauge is gone mileage 241,000 Mobil/One since new great car ........ looks and running odometer works intermittently and sometimes trip odometer goes backward
|
| Air senser? | 01 Sep 2006 02:02 GMT | 2 |
Just replaced my air box, due to cracking and leaking in dirty air. with a cone air filter...works and sounds good but one problem, there was one senser that was in the box that obviously isnt on the cone filter (its not the mass flow senser) its a little one. So i kept the
|
| 95 Astro Running rich | 01 Sep 2006 01:36 GMT | 1 |
hello, I have a 95 astro (W) which runs rich. I can smell gas out of the exhaust. i have spend some money on tuneup (spark plugs, wires, distributor cap, air filter,pcv valve). I changes, spider injector because previous one
|
| Siezed screw in 2.8 plenum | 01 Sep 2006 01:35 GMT | 1 |
I'm experiencing starting problems with a 2.8 MPI. I have a donor car from which I was going to rob the IAC motor, and upon inspection one of the two screws holding it in had been snapped off at the screw head. Then I looked at the actual car I'm working on and it's the same ...
|
| 1984 GMC Dump Truck transmission line to PTO problem. | 01 Sep 2006 01:29 GMT | 1 |
Hi, we have a 1984 GMC Detroit Diesel Dump Truck and we have changed out the transmission for it, but we're not sure how to hook the Transmission lines back up to the PTO. Does anyone have a diagram of how to do this, or might be able to explain this? I know this is
|