| Thread | Last Post | Replies |
|
| fuel | 24 Dec 2006 12:39 GMT | 1 |
when i try to put fuel into my 2005 gmc jimmy. I have a hard time because the gas wont go into the car the gas pump just keeps actimg like the tank is full but i know it isnt. Also the gas light indicator is on telling me that it needs gas but i cannot put gas into it . Any
|
| Horrible MPG cause unknown ('99 olds intrigue) | 24 Dec 2006 11:30 GMT | 9 |
Hello group. I've a 1999 Olds intrigue (3.5l/94K) that's been getting awful fuel economy for some time now and nothing seems to help. For the first year or so I owned it, it consistantly got 19-20mpg in all city driving. For
|
| '94 Oldsmobile Cutlass Supreme Engine problem | 23 Dec 2006 01:49 GMT | 1 |
I've had this Cutlass Supreme SL 3.1 for 2 years and bought in with less than 30,000 miles on it. This car has always used a lot of oil. At this point it's down a quart after only 350 miles of driving or less. There's no oil on the ground,
|
| Parts Source - '97 Buick Mirror ? | 21 Dec 2006 04:05 GMT | 5 |
A friend needs a side view mirror for a '97 Skylark Custom. Any pointers to web sources for an exact replacement parts? Thanks,
|
| Mass Air Flow Sensor? | 19 Dec 2006 21:55 GMT | 5 |
Hi there. I have a 95 Lumnia 3.1 There's a sensor that plugs into that plastic piece that fits over my air filter...I think it's the mass air flow sensor. Well neways, sometimes I get a rough idle, a rough and somewhat slowed initial acceleration, and pungent exaust...then
|
| question on 1964 Chevrolets - six cylinder vs V8 models | 19 Dec 2006 05:39 GMT | 5 |
Hi - I jjust bought myself a 64 impala 2 door htp as an early xmas present - it has the 283 in it One of the local yards has a 64 biscayne 6 cylinder with some good trim parts I can use like the bumpers - I am thinking about buying the whole
|
| OBD2 code 0301 | 18 Dec 2006 13:40 GMT | 1 |
1997 Chev Cavalier 2.2 L OHV (lifting rod) engine. installed a Jasper Remanufactured Engine. After a few days of driving, Check Engine light came on. OBD2 scanner pop's code 0301 (Cyl # 1
|
| Overheating Problems with a Cavalier | 18 Dec 2006 12:29 GMT | 7 |
I have a 1999 Cavalier. I guess I should say this first: I am unfortunately one of those people who know next to nothing about cars, other than to get it gassed up. I had an oil change done about 2500 miles ago, and I guess
|
| having trouble with no heat getting to cab | 17 Dec 2006 19:41 GMT | 3 |
I have a 95 sonoma 2.2l truck, 2 wheel drive,anti freeze and the rads hot, hoses to the heater hot,but no heat to the cab, put in new thermostat,when you first turn heater on there is heat, then it goes cold. any ideas what the problem may be. thanks pcote
|
| 93 Buick LeSabre brake not releasing | 17 Dec 2006 17:13 GMT | 8 |
I have a 93 Buick Lesabre Limited which has been working fine for about two years with the ABS light is on. Now recently after i replaced my brake pads and rotors, my front left brakes are not releasing from the rotors. I believe its just the left side because when I stop and get
|
| GMC Jimmy Error Code 440 | 16 Dec 2006 21:27 GMT | 4 |
On a 1996 GMC Jimmy. For the past 3 months, I regularly (once every 2 weeks?) get a engine warning light resulting in code 440. Initially, I was advised maybe it's just a bad batch of fuel or tightness of fuel cap. Obviously after so many repeats, this is not the
|
| location of blower motor in 2000 cadillac sedan deville | 16 Dec 2006 05:25 GMT | 3 |
I cannot find the blower motor for the HVAC system. I need to get at it for repair because it squeeks. Again, it is a 2000 Sedan Deville Cadillac. Also some steps to get at it would be nice too if someone could share.
|
| auto windows tinting (regulations in Ontario)? | 15 Dec 2006 21:34 GMT | 2 |
Hi folks, I am interested in tinting the windows of my car. I am wondering what the regulations are in Ontario related to the tinting of auto windows? I recall that you can not make it too dark in the front or something like that ? right? Can someone please shed light on this
|
| 2000 chevy Venture Power Window PROBLEM | 15 Dec 2006 18:22 GMT | 6 |
The window on the drivers side will no longer go down. I picked up a new motor, but that is not the problem. The motor works fine to go up, just not down. So is it the switch or is there a relay some where that is bad? Thanks in advance
|
| 90 lumina no reverse | 15 Dec 2006 03:48 GMT | 5 |
90 lumina euro 3.1 auto trannie w/OD. 131000kms (81000mi). Recently bought this car, did the government safety (in manitoba canada). Drove around for the day. Always a little sticky going into reverse, like I'd I have to hunt for it on the shift selector. Never a big deal
|