Hello,  I'm pretty sure I have a intake manifold gasket leak or maybe a
bad heater core.   Hoses look good, doesn't overheat, just leaks a
little coolent (quart every other day).  Internal raditor looks pretty
corroded.  Can anyone give me a ball park estimate to repair?

I need some ideas on what to look at to get the engine started. The
car is a 1996 Impala with 40k miles. I installed a LT4 camshaft,
ported iron heads, roller rocker arms, new timing chain, and optispark
distributor. Now the engine cranks but won’t fire at all. I double

Could Lutz be preparing for Plan B at Toyota?
GM exec gives Toyota truck thumbs up (Mike Hunter Take Note)
http://money.cnn.com/2007/01/09/news/companies/lutz_tundra/index.htm?postversion
=2007010913
DETROIT (CNNMoney.com) -- The new Toyota Tundra, the Japanese automaker's

I would like to know if anyone has had any service done lately on a
GM-Diesel Pickups.
What is the hourly rate anyone pays for this service.
I was just curious as to what people have to pay.

Looking for a rear bumper for a 1981 Oldsmobile Delta 88. Can anyone
help?

Have 2000 buick regal 73,000 miles have front end vibration at 36 to 45
mph. Put new tie rods on front end aligned new tires-balanced. Also new
plugs. newbie any comments.

Ok. So...
A long time ago, in a city far far away, overnight the air became
frigid-the years first frost glazed cars's windows.  The following
morning, trouble began.  When the car was in park, the idle would be

I just finished reading a magazine article about diesel engines.
Simplicity, longevity, great torque, etc. etc.,
and in todays world, the ability to run on
anything from soybean oil to chicken fat !

Anyone have any suggestions on best way to access/change rear 3 plugs
on 2001 Park Avenue. Got front three without a hitch, be darn if I can
get out the back ones?

HI  new on here but need help..purchased a 93  1500 with no engine was
a 5.7 i want to instal a 96 4.3 in its place .What problems do you
forsee in doing this ..computer etc ..thanks in advance for any and all
help you can give . tks    Al

I will make this short although the ordeal was not.
Bought  a new Cobalt in July near our summer place 250 miles from our
permanent home, it had some shifting problems and we brought it back
there Thanksgiving weekend since we were closing the house anyhow.  On

Have 94 LT1 from Buick roadmaster in 48 Chev have had it running but
can not get it to start.
Checked ignition as per manual and have spark at plugs but weak. Have
40lbs fuel pressure and plugs are wet when I pulled them. Have had

They're going electric in the Motor City, Detroit -- well, maybe not
just yet.
But it made for a nice "buzz" as the world auto industry gathered at
one of its premier events, the North American International Auto Show,

I have just installed a rebuilt 350 into my 79 Chevy and can not get it
to run. I have had the distibutor in and out a dozen or more times
following the #1 cylinder at TDC and the rotor pointing to #1. I can
get it to fire a little bit by turning the distributor all the way

While driving along last week I heard this news headline.
It got my attention, because I immediately thought Toyota had now been
taken over by their own ego.  
Could Toyota be so stupid to take over GM?  They don't need to.