I've had my blazer for a few years and I am approaching 120k in miles.
I did a tune up (Spark plug wires, plugs, rotor and cap) at about 85k.
I just replaced the fuel filter.  When I start up the beast, sometimes
it runs fine, sometimes when the idle comes down from the start, it

I'm helping my buddy pull the tired engine from his '57 today.  The
question is whether to rebuild it (a 283) or to replace it with a modern
GM crate engine.  GM offers a small block for "pre-1985 vehicles) which
looks at first glance like it should drop right in.  I wonder, ...

I'm replacing the turn signal/cruise control switch in my wife's
Century.  I'm down to where I unplug the two connectors (1 gray, 1
black) from what's called, in the Alldata procedure (and I assume also
in the GM FSM, which I don't have), the 'steering column bulkhead

http://www.motortrend.com/features/auto_news/2006/112_news061024_future_chevy_impala
I'm liking the possibilities of this, can I keep my '05 going until the
new RWD Imp comes out?  RWD and IRS YEAH BABY.  Only thing is I know the
company won't pop for a V-8 version, what is this ...

Full employment for Mexicans and Chinese and Koreans and...-but not
Americans with current management
GM's Wagoner sees more job cuts
http://money.cnn.com/2007/01/05/news/companies/bc.gm.wagoner.reut/index.htm?post
version=2007010506

May 2, 1977 09:25 Edward Cole
67,
GM president creator of the Corvair.
Mendon, Michigan

Spotted in the front section of this month's Hemmings Muscle Machines -
apparently the next-gen Impala will be built off of a RWD, Holden
Commodore-based platform rather than the current Lumina-based platform.
IMHO this is good news as although I haven't driven one, the Holden

I have a 2006 Lucerne with the 10 spoke chrome plated wheels.
The balancing weights appear to be attached in some way other than the usual
"clinching" method I'm used to seeing.  Eight some great adhesive or welded?
They are visible through the openings and located on the inside ...

I'm still having trouble with no heat getting into cab, I checked under the
hood and every thing is warming up, rad hoses etc. Awhile ago I added stop
leak for a leak since then I think we have had the problem, this was in
warmer conditions and did not notice until it got colder, ...

I have a 98 Park Avenue with 55K miles on it. Because of the infamous intake
manifold leak associated with these engines I keep a close eye on it for
coolant leaks.
Today while I was inspecting my engine compartment I noticed a small metal

Hello, I have an '86 Cavalier with a 2.0. It idles high when started
and doesn't idle down. It seems to idle even faster when it's warmed
up. We've changed the computer and throttle position sensor. Still no
luck.I thought it might be a vacuum leak somewhere or a bad sensor that

Can anyone explain the differences between the 3800 series ll and the series
lll? Has the intake manifold leak problem been fixed on the series lll?

Can the New-Look Malibu Help Jump-Start Chevy?
http://tinyurl.com/yg5lsd
By JOSEPH B. WHITE
January 2, 2007; Page B1

....   the 3.4 L, 6 cyl engine? Found one at a good price, but is it a
lemon?