| Thread | Last Post | Replies |
|
| 1995 Z71 | 03 Mar 2007 01:24 GMT | 4 |
I have 95 z71 runs great everything works fine the at any time idling or driving down the road it happens the blower cuts off the wipers cut
|
| jacking up a 95 Cavalier | 02 Mar 2007 18:21 GMT | 8 |
Last Summer I needed to jack up the Cavalier to change the brake pads. The jack was moving but the car wasn't. Bent down to see what was going on and saw that the jack was starting to sink in the frame rail. Tried in a couple of other places. Same thing. Eventually was
|
| 97 cavalier no start/high rpm/engine stall | 02 Mar 2007 05:04 GMT | 8 |
thanks for taking your time. On 97 cavalier 2.2 there are following problems: - Engine stalls or studders on stop lights when i stop and idle. Not every time though. giving a little tap or two on a gas pedal would
|
| Ac Delco factory radio clock not keeping time | 01 Mar 2007 23:05 GMT | 1 |
HELP I recently installed a GM acdelco factory radio in my s10 Model No 16232131 everything works with exception of the button lights & the thing that
|
| Ontario's 10-DAY TRIP PERMIT (question) | 01 Mar 2007 02:29 GMT | 8 |
What is included in the 10-DAY TRIP PERMIT that you obtain from the Ministry of Transportation? I just picked up another vehicle and haven't done the paper works to transfer the plate from my old vehicle to this one I just bought. However I was able to obtain a 10 day trip
|
| 04 silverado has "service 4WD" | 01 Mar 2007 02:09 GMT | 4 |
message showing and the 4WD buttons do not work, none have light on. What is usually the problem? Any help appreciated.
|
| '05 Impala parking brake | 01 Mar 2007 01:45 GMT | 1 |
just curious, does the parking brake on the '05 Impala work like a Corvette where there are little shoes inside the rotor hat, or is the parking brake mechanism inside the caliper itself? I had my oil changed yesterday and asked them to look at the e-brake mechanism because it
|
| Torque Specs for 99 Blazer Hub Nut (4X4, 4-door) | 01 Mar 2007 01:21 GMT | 1 |
Hey, can someone look up a quick torque spec for me? I need the settings for the front axle hub nut (the 36mm one) on a '99 4-door 4X4 Blazer. Thanks!
|