Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / GMC Cars / April 2007

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
350 help08 Apr 2007 13:45 GMT5
Bought a 1986 GMC c30 350, with supposedly 160 k on it last thursday
(day 1).
Motor started up good - idle was rough - engaged in drive , idle
really too low, when brakes where applied, it would backfire.  Exhaust
OLDS CUTLASS08 Apr 2007 02:26 GMT3
I have a 6cylinder auto with no markings on it to say which model it is?
It has 49,249 miles, power everything an radio,no deck or CD.I want to
sell it but don't know how to look it up on Kelly Blue Book as I don't
know which model it is.can anyone help.
Kerkorian Makes Offer for Chrysler06 Apr 2007 15:33 GMT1
Kerkorian Makes Offer for Chrysler
http://www.breitbart.com/article.php?id=D8OAK6KG1&show_article=1
NEW YORK (AP) - Billionaire investor Kirk Kerkorian is proposing to pay $4.5
billion in cash for Chrysler, as parent DaimlerChrysler AG examines what to
Third brake light out mystery- 96 Buick Century06 Apr 2007 02:25 GMT10
My head is sore from all the head scratching- what am I missing?
The third brake light doesn't light, the left and right brake lights are
fine. First, I put a brick on the brake pedal.Open the light, replace the 2
bulbs with 1156's like the owners manual says- doesn't work. Wait- ...
more stupid design - front license plate pocket06 Apr 2007 01:51 GMT4
I am just starting to have a serious loathing for GM engineers...  I
live in Virginia, and prior to that I lived in Maryland.  Both states,
like most, require a front license plate.  My company car is a Chevy
Impala.  Part of the deal is that I am supposed to maintain the car in
hi05 Apr 2007 19:49 GMT1
test
Dealer told me they're all like that now05 Apr 2007 06:34 GMT1
Gas pedal too touchy.
Steering too touchy.
Dealer said all the cars are like that now, regardless of make or model.
He said the solution to the gas pedal complaint is cruise control.  To me,
location of evaporator drain on Impala?05 Apr 2007 04:17 GMT12
Subject says all...  car has horrific stench inside after sitting out
all day like there's a rotting sandwich under the seat or something;
well I'm not the cleanest guy in the world when it comes to company
vehicles but I just spent the morning dunging it out and the only
1997 Venture - Repeated Alternator Failure05 Apr 2007 02:59 GMT4
My 1997 Venture with 98K miles has experienced repeated alternator failures.
The vehicle has the Valeo 105A alternator.  I replaced the original unit 2
years ago with one from Napa.  It lasted until January 2007, though I
experienced problems well before I replaced it.  The ...
Police suspension on 2001 Impala05 Apr 2007 01:43 GMT3
My Impala is starting to tell me about every bump in the road and it
seemed a little sloppy on corners- and it really notices when I have a
utility trailer attached. . .
So my mechanic did all the diagnostic measuring and thinks it is
See the Holden Pontiac G8 Commodore Pics Here05 Apr 2007 01:22 GMT11
Is it a Pontiac? Is it a Holden? Its 2...2...2 cars in 1!
http://www.motortrend.com/photo_gallery/112_0704_2007_holden_commodore_ssv_gallery
chevrolet venture fuse panel04 Apr 2007 15:35 GMT1
Does any one know where the fuse panel is situated on a chevrolet
venture. I dont have access to the car in question but need to explain
to a friend over the phone
Engine stumbles on acceleration04 Apr 2007 13:50 GMT6
Hi, hoping some one can help diagnose this problem, car is a 1995 Chev
Metro, 1.3L Auto., car idles fine, components replaced are cap and rotor,
spark plug wires, plugs were fine and cleaned and gapped. Fuel filter
replaced. car still stumbles when given enough throttle to go ...
adding grease to mechanical fuel pump before install04 Apr 2007 12:05 GMT1
I'm going to install mechanical fuel pump on 1981
Pontiac, 305 c.i. V8
- It's the type of engine using pushrod between cam eccentric and pump
lever.
Gasoline prices ready to hit new high in S.F.04 Apr 2007 02:13 GMT5
So much for Detroit and the Little Three chances for this year if this keeps
up through the Summer
Gasoline prices ready to hit new high in S.F.
http://sfgate.com/cgi-bin/article.cgi?file=/c/a/2007/03/30/MNG50OUPG71.DTL
Pages: 1 2 3 4 5 6 March, 2007
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.