Editorial: Free workers by passing federal right-to-work law
http://www.detnews.com/apps/pbcs.dll/article?AID=/20070903/OPINION01/709030337
When labor unions were still relevant, Labor Day was a holiday of
union-sponsored parades and picnics, a chance to pause from the daily

Does anyone have a PDF copy of a service manual for a 1988 GMC 1/2
ton? I sure would appreciate getting a copy to try and solve a few
problems that my dad has with his pickup.

Thought I would have this licked. Got this code when SES light came on.
Checked code at auto* and said "Oxygen Sensor Circuit Slow Response
(Bank1, Sensor1)"
Since I have 188K miles on it I elected to replace the sensor. Did so and

Honda Civic Performance - Check it out
http://www.zone-car.com/?honda-civic-performance.php

Hello,I am working on  a engine swap, installing 1988 2.5 in a 1991
grand am. Can I put the coil pack on the 1988 and remove the
distribitor? and is there any other differeces besides the oil filter
location

Ford and GM say factories in US face axe
http://observer.guardian.co.uk/business/story/0,,2156191,00.html
 James Doran in New York
Sunday August 26, 2007

I'm being offered a C1500 with 96000 miles. Although it seems to be in
great shape, I am wondering if there were any issues with this
year/model that I should be concerned about. Thanks.

Am seriously considering a new Buick Rendevous but am curious about
what kind of mileage I can REALLY get....not the posted numbers.
Interested in normal expected mileage traveling the interstate in
the 65-75 mph range.

I had a 1996 Buick Riviera before and I swear it had a feature where you
could set the the interior lights to slowly dim after the doors were closed.
I think they called it "opera lighting".  I don't remember how it was set.
I now have a 1995 Riviera and see no such operation. Was ...

vehicle -- 1998 S10 4x4 automatic trans.
I was driving along at about 50 mph when the speedo went to zero.
About 3 seconds after that, the ABS light came on.  Another 3 seconds
after that, the trans. kicks down to first gear...

I have a 1967 firebird w/ 326 engine recently rebuilt. The cam and lifters
where not changed because the engine builder said they where ok. They where
not!!!.Cam was a race cam and 3 bad lifters. I have installed a stock cam,
lifters and pushrods as well as rockers. I also changed ...

I think my timing chain has slipped. It was tuned up yesterday, and the motor
mounts were replaced. Any time I put a hard load on it, it'll spit, fart,
pop, or buck. If I'm easy on the gas, it won't hiccup, but it takes awhile
to get moving.The distributor shaft(original) had almost ...

Does anyone know if the coolant  level or temperature will prevent the
Compressor clutch from enggine. . Yhere is a coolant temperature
sensor in the system, Will that prevent the clutch from engagaing

Hello, I don't know a hell of  a lot about the fine points of engines
beyond gas mileage and 0-60 speed, so I was wondering what practical
differences there are between overhead valve vs. overhead cam
engines.  Secondly, assuming an engine has overhead valves