Hello, My GMC Jimmy VIN code W 8cyl VORTEX engine w/ auto tranny 4WD's
tranny is not working properly. At first reverse would studder, like
clutch slip, then in drive it will shift into drive and move but will
not shift until 3000 RPM and it kind of sticks until it will shift

My 73 Nova started leaking transmission fluid from the transmission dip
stick tube. It's a TH350 behind a 454. Took me three hours to get the tube
out of the transmission today. And, no way can I remove the tube from the
car, but I can replace the O ring. Question is how the hell ...

I understand this is a GM thing that happens to chevys, olds, pontiacs and
buicks?? anyone know of a FIX??
--
Message posted using http://www.talkaboutautos.com/group/alt.autos.gm/

Forget No. 1; go for profit GM must focus on quality, not corporate ego
http://www.freep.com/apps/pbcs.dll/article?AID=/20071028/COL14/710280666/1014/BU
SINESS01
Who's No. 1? Who cares.
The sigh of relief around Detroit when sales figures this week showed

Anyone know what the best thing is for removing the residual adhesive
from Duct Tape?  Preferably something which won't affect the color of
the plastic dashboard on which it is stuck.  Normally I'd expect laquer
thinner or something to cut through it but I think it would make it ...

BDM EDC16 Flasher, software + PCB + interface schematic + Dump
BMW Scanner 1.3.6, software + PCB + interface schematic + Dump
BWM Carsoft 6.5, software + PCB + interface schematic + Dump
Can commander ver: 2.1, 3.0, 4.2, 4.5, 5.0, 5.1 soft. + PCB +

They couldn't just use friction-hold wheel covers on my BUICK.
Instead, some yo-yo at GM designed "special, double-threaded wheel nuts"
You attach the wheel covers to these with plastic nuts.
This works well, if you never change the wheel !

What are the differences between the 2?  Could the '94 engine easily be
put in a '96 car?
Thanks,
Ken

Do winter tires differ greatly between different brands?  If you are
to choose between
tire a)  Nordic  or b)  BG Winter Slalom   ? which one would you get?
and why?

Seems like the Japs have forgotten what we taught them about building
cars.
http://www.businessweek.com/autos/autobeat/archives/2007/10/toyotas_quality.html
/?/?/?/?/?/?/?/?/?/?@@@@@@@@@@?/?/?/?/?/?/?/?/

New deal, new layoffs for GM
http://www.detnews.com/apps/pbcs.dll/article?AID=/20071025/AUTO01/710250335/1148
A labor contract that provided unprecedented promises to keep work
flowing at General Motors Corp. factories nationwide wasn't enough to

Check out this link - http://www.forbes.com/2006/07/17/poorly-rated-vehicles_cx_dl_0718featA_ls.html
I live in the Detroit area and have watched Detroit die for the past
five years. Sure the *Downtown* area has seen great improvements, but
the rest of Detroit is a waste land that ...

Hello. The compressor on my Buick is noisy and going out. When I kick
in the defrost the noise subsides but doesn't stop. The clutch also
starts and stops. My question is what damage can I expect if I just
continue to drive the car without using the compressor? I saw a

I was taking the kids somewhere over the weekend which was about 70
miles away.About half way there the transmission started acting up if
you stopped at a stop light then go the car didnt want to go it would
make a whining sound but when you got to about 40 you was fine it ran

what are the steps of programming a keyless remote for a 04 gmc envoy
--
Message posted using http://www.talkaboutautos.com/group/alt.autos.gm/
More information at http://www.talkaboutautos.com/faq.html