| Thread | Last Post | Replies |
|
| '96 Civic - pings and things | 22 Jul 2004 16:29 GMT | 4 |
First, let me say that I really enjoy this ng and have gleaned some valuable information from the knowledgeable posters here. I'm hoping some of you can give me some hints on how to solve a few problems with my '96 Civic DX 1.6 5-spd with about 180K miles.
|
| '99 Accord V6 hesitation 1500-2000 rpm | 22 Jul 2004 14:39 GMT | 4 |
My 99 Accord V6 (90 k miles) has been hesitating/stumbling under very light throttle load around the 1500 to 2000 rpm range. I reported here earlier that a Honda (dealer) Service Manager who drove the car was fairly certain that it was an EGR problem. Google
|
| 1990 Prelude A/C | 22 Jul 2004 13:29 GMT | 1 |
Where do I find the low pressure fitting on my Prelude so that I can convert my coolant?
|
| 95 Accord Camber Problems | 22 Jul 2004 10:51 GMT | 6 |
I have a 95 Accord that is wearing out the inside and outside of the front tires. (mostly inside left front) I bought the car in 97 with 33,000 miles on it. It had new tires when I bought it and I'm now getting ready to buy my third set due to the outer
|
| Odometer not working | 22 Jul 2004 10:03 GMT | 2 |
Have 92 Honda accord manual shift ( 5 speed ). The trip and car odometer just stopped working. The speedometer is working just fine. Where should I look to repair this problem? The speed sensor or ? Any help greatly appreciated.
|
| 95 honda civic won't pass emissions | 22 Jul 2004 09:31 GMT | 11 |
I've had my honda civic's emission system tested three times and it failed three times. I've changed the spark plugs, oil, wires, distributor cap, rotor, o2 sensor, and the air filter. Does anyone have any suggestions on what else needs to be done? The reading for the last test ...
|
| 88 honda accord LX | 22 Jul 2004 09:26 GMT | 4 |
ok so im a chick who knows nothing about cars so i need some assistance..i have an 88 honda accord LX heres the 2 problems..#1 one of the holes where the spark plug goes is stripped so it doesnt fit tight and #2 when you start it it runs about 2500 then as soon as you go into ...
|
| Looking for Victims of 1SourceAutoWarranty.com | 22 Jul 2004 06:27 GMT | 3 |
Anyone have a bad experience with 1SourceAutoWarranty.com Car Extended Warranty? Right from the beginning I've had problems with them. I took my car to the dealer and 1Source refused to pay what the dealer was asking for the price for the starter and labor so I had to pay the ...
|
| rumbling noise | 22 Jul 2004 05:00 GMT | 1 |
When moving at low speeds, turning and slowing to stop, I hear a rumbling bumping noise. I thought it could be joints in the front wheels. I put it on a hoist but didn't notice any play or unlikely vibration.
|
| Accord's engine turned off at the lights | 22 Jul 2004 04:03 GMT | 4 |
I have a 99 accord. I messed up and drained the battery yesterday. So I jumpstarted it and drove around for about an hour to get the battery recharged.. The car started fine this morning, but the engine sounded
|
| chain or belt on 04 accord | 22 Jul 2004 03:47 GMT | 2 |
Is there a timing belt or chain on the 4cyl 2004 accords?
|
| Question to those who use synthetic oil | 22 Jul 2004 03:47 GMT | 14 |
I am considering switching to synthetic oil when I buy a new Accord in the next few months. Do the manufacturers of synthetic oil offer a sticker to put near the engine block reminding anyone who services my car that I am using synthetic oil?. I often get my oil changed at the
|
| accord egr valve | 22 Jul 2004 02:54 GMT | 2 |
I was told that there is a retrofit kit [egr valve]for my 98 v-6 accord.Can anyone give me an idea what it involves to install.
|
| 2004 Accord 6 Cyl. LX: 2 Quest's. On Trans. Recall, & Also On Paint, Please | 22 Jul 2004 02:49 GMT | 4 |
Great newsgroup; have sure learned a lot. Re 2004 Accord LX, 6 Cyl..: a. Saw several posts, including on the Honda site, regarding a transmission recall, but can't get a really
|
| How to remove "press fit" Rotors??? | 22 Jul 2004 02:48 GMT | 7 |
I believe the 96 Accord EX coupe I'm looking at has brake rotors that are press fit. I've done many brakes where the rotors just slide right off after removing the calipers.
|