| Thread | Last Post | Replies |
|
| Horns: How loud? | 29 Apr 2005 10:56 GMT | 6 |
Anybody have any idea how loud (decibels @ one meter, or some known distance) the OEM horns are for any year of Accord? I have an '05 and it's one of the specs no one seems to have readily at hand. -- CL.
|
| Gear oil vs. motor oil viscosities | 29 Apr 2005 04:00 GMT | 15 |
We were discussing this subject a while back. Just found this link: http://www.vintagetriumphregister.org/maintain/oil-overview.shtml
 Signature TeGGeR®
|
| need help adjusting valves 96 prelude S | 29 Apr 2005 03:10 GMT | 2 |
hi i needed to adjust my valves on my 16 valve f22 motor it makes a clicking sound in the engine i dont know how much to tighten them any suggestions? thanks
|
| Need updates for 94 del Sol S | 29 Apr 2005 01:37 GMT | 2 |
Hi everybody!! I've got a 94 del Sol S with 192,400 miles on it and I need to do some updates to it. Just had my 2nd timing belt change and did valve adjustment at the same time. Here's what I need: 1. New suspension - mine is the stock suspension and is badly worn.
|
| Major Problems with my 91 Accord. HELP!! | 29 Apr 2005 00:52 GMT | 2 |
Hi Guys I’ve had a problem with my 91 accord for about 4months. About six months ago I had my engine replaced due to a blown head gasket. About four months ago I got the engine code 43. I went to a reputable honda mechanic and he replaced the O2 sensor.
|
| Alarm horn sound obscenely loud (2005 CR-V) | 29 Apr 2005 00:29 GMT | 4 |
I bought the alarm system and no one has stolen my beast yet, but damn, I'm afraid to lock and unlock the thing at my apartment cuz the horn beep is so loud. Do I have any other options than taking it in to the dealer to get the sound confirmation turned off? I would like one of
|
| 87 Honda accord misfiring problems | 28 Apr 2005 22:44 GMT | 6 |
I have a 1987 Honda accord which has a major misfiring problem. When the car is at the traffic lights if keeps wanting to stall and the car jolts pretty bad. when i go to take of the car hessitates and takes about 2-5 seconds to properly accellerate.
|
| Need website re: Engine Pictures | 28 Apr 2005 22:33 GMT | 6 |
I own a 1999 Honda Accord EX (4 cyld.). I am trying to learn as much as possible about how my engine works since most of my mechanical experience has been with old GM cars that did NOT have VTEC type systems or balancer shafts. The two repair manuals that I
|
| Civic Seatbelt Question | 28 Apr 2005 19:48 GMT | 8 |
I have heard other people talk of this, so I hope some one out there knows the answer. The passenger seat belt in my 2000 Honda Civic DX is unlike the driver side seat belt. The driver side belt will extend and retract as the
|
| 2003 CRV Maintenance Light | 28 Apr 2005 17:52 GMT | 4 |
I have a 2003 CRV and the maintenance light flashes for about a minute after I start it. Is this normal? Thanks Mark
|
| Honda Prelude ABS Lamp | 28 Apr 2005 17:35 GMT | 4 |
I've got a late '92 Honda Prelude that has the ABS light come on after pressing the brakes a few times. I've got a few questions: - First of all, is it dangerous to drive the car in this state? i.e. Does the ABS just get disabled and it's not a big deal, or is there a safety
|
| 1999 Model UK Accord - display lights | 28 Apr 2005 15:11 GMT | 3 |
Can anyone give pointers as to how to replace the backlights on the climate control display/clock for the UK model of the 1999 Accord SE Executive? They've both blown now, and I can't figure out how to get at 'em!
|
| having problems with 91 honda civic dx | 28 Apr 2005 13:53 GMT | 11 |
having problems with honda not starting, replaced coil, rotor button, cap, wires, plugs, ignitor module, and it is getting fuel. anyone with suggestions?? i am getting desperate here. thanks!
|
| Door seal/gaps | 28 Apr 2005 13:18 GMT | 2 |
I noticed on my 04 Accord coupe that the passenger side door doesn't line up very well. The rubber seal at the very top, visible with the door closed from the outside, doesn't make contact during the last 6 inches or so, starting from the rear of the door. Also, the tiny
|
| changing oil filter | 28 Apr 2005 09:19 GMT | 3 |
Is the oil filter wrench made for the Element necessary to replace the oil filter? Can I use a regular oil filter wrench or does the one for the Element make it easier? Thanks!
|