| Thread | Last Post | Replies |
|
| unplug the spark-plug: error code or not? | 19 Jul 2005 04:24 GMT | 6 |
To make sure all 4 cylinders are running, I unplugged the high voltage wire from each spark plug (one a a time, not all at once). Each time the idle RPM dropped a little bit, so I said "OK, each cylinder must be firing properly".
|
| Prelude dash removal | 19 Jul 2005 04:03 GMT | 1 |
i just baught a 2000 Prelude and the owner installed before me this HIDEOUS brushed aluminum dash bezel behind the plastic lens in my dashboard. Anyone know how to remove the plastic cover so i can get at this thing?
|
| what company is JDM? | 19 Jul 2005 03:37 GMT | 3 |
I am considering replacing my 5 speed tranny 94 civic 1.5L lx and see many JDM used transmissions for sale, used, $200 or less, some are more. They claim to have appx 40k miles on some of them. is JDM a good brand ?
|
| Leaking Head Gasket on New '05 Civic Hybrid at 5,100 miles ... is this common? | 18 Jul 2005 21:46 GMT | 4 |
Boy, our family is enjoying more than it's share of new Honda problems. My '03 Accord is in getting it's new transmission. My sister-in-law is visiting with her new '05 Civic Hybrid. I noticed an oil spot under it so we took it to our Honda dealer just to have it
|
| Reg Gas For 6 Cyl 2005 Accords ? | 18 Jul 2005 21:45 GMT | 3 |
a. New 2005 Accord 6 cyl take reg gas ? b. Any idea when the 2006 will show up ? Thanks, B.
|
| Timing belt 4 sale (Festiva, Prelude,323,Tracer) | 18 Jul 2005 21:44 GMT | 2 |
Gates Timing Belt # T141 applications: 1988-89 Ford Festiva 1.3L 4 cyl. (SOHC) 1990-91 Honda Prelude 2.0L (DOHC)
|
| Air Filter Self Serviceable? | 18 Jul 2005 21:43 GMT | 3 |
My son took his 05 Accord EX 6-cyl to the dealer for scheduled service and was told that his "air filter" needed to be changed and the charge would be $100 He didn't have it done...
|
| cd-rw media that works in your honda? | 18 Jul 2005 18:11 GMT | 7 |
What type of cd-rw media works in your honda? i have a honda accord 2000. the only cd-r media brand that works is fuji. i have tried others such as staples brand, verbaitm, and a few others that don't work. i have tried one cd-rw that didn't work, i left it at home and don' ...
|
| Ping: Tigger | 18 Jul 2005 17:57 GMT | 6 |
At work the other day a Honda came in with an EGR code... Standard 2.2 I believe. We replaced the egr valve, but the code came back, so I researched it on IATN (awesome site for auto mechanics) anyway it suggested cleaning the ports in the intake manifold. I was amazed at how ...
|
| Honda Engine Makes Rattle at 30mph | 18 Jul 2005 17:22 GMT | 7 |
Have a Honda Accord V6 2001. Engine makes a rattle sound when you accelerate to around 30 mph, as you go faster it goes away. Most noticable when going up hill and pressing the gas, it does not make a noise when coasting. Any ideas on what this could be?
|
| 05 Accord Where is Cabin Air Filter? | 18 Jul 2005 13:39 GMT | 13 |
Subject line says it all. 2005 Accord EX Where is the passenger cabin air filter located and how does one go about accessing it to replace it?
|
| too late for synthetic? | 18 Jul 2005 05:24 GMT | 9 |
My 2001 Civic LX manual transmission has almost 60k miles. I think the original engine oil was special because the dealership refused to change it until I had about 7500 miles. Then I changed the oil every 5000-6000 miles, I figured my driving is between normal (10k) and
|
| Radio Code | 18 Jul 2005 04:58 GMT | 5 |
I have 1999 Accord, Toronto, Canada. The battery was disconnected, (starter change), now my radio needs activation code This car is second hand, I don't have the original code,
|
| Odyssey 2000 EGR system | 18 Jul 2005 04:50 GMT | 1 |
My engine check light came on and the ODB code indicates restricted EGR flow. Looking briefly I see what appear to be sensors in the exhaust before the cat con and in the cat con itself, but I do not see the EGR valve nor the line to it. Anyone familiar with these enough to ...
|
| Replacement of Manifold Gasket | 18 Jul 2005 04:23 GMT | 2 |
I believe my car has an exhaust manifold leak and I am now looking at changing the gasket as a starting point. After reading the Honda workshop manual it stated that you should change the manifold stud, self locking nuts. My question is do I really need to change the self
|