| Thread | Last Post | Replies |
|
| 90 Civic sedan"winshield moulding removal" | 28 Jul 2005 16:24 GMT | 1 |
I have to change the winshield on my 1990 4 dr.From what i see it looks like the moulding snap on the side of the winshield before you install it on the car.Anyone has info on that removal procedure? Will i have to buy new mouldings for it?
|
| '89 Civic - steering wheel vibration | 28 Jul 2005 15:59 GMT | 4 |
The steering wheel on my '89 Civic vibrates noticeably left-right, like the car is alternately pulling in both directions, when going 50 MPH or better. At lower speeds I don't feel it (or it is slight enough that I don't). I checked the tire pressure, and they're all good. Is ...
|
| which first: pads or fluid? | 28 Jul 2005 14:58 GMT | 5 |
Hi, I am going to replace the brake fluid and also the front pads. Which one shall I do first, and why? Thanks.
|
| temperature gauge going all the way up when the car is not running | 28 Jul 2005 12:40 GMT | 10 |
my gauge was all the way up to hot then it would drop all the way to normal, the car was not overheating it seemed like the guage was stuck and it would go all the way up when the car was on but not running ,so they changed my temperature sensor,it was fine for 2 days then it did it
|
| spark plug wires: old but under 10kOhms | 28 Jul 2005 06:10 GMT | 30 |
I just check the spark plug wires on my newly purchased 1997 Civic: they are from 1997, probably the OEM wires, and they all measured under 10kOhms. I will also look tonight with the engine running to see if I notice any "sparks" around the wires, but I was wondering if I should
|
| 99 Accord Water Pump | 28 Jul 2005 06:08 GMT | 1 |
99 Accord V6 3.0L To replaced the water pump how many o-rings/gaskets do I've to replace ? Are they come with the new pump ? How many tensioner & idler are there for the Timing Belt?
|
| Civic brake disk thickness? | 28 Jul 2005 05:02 GMT | 3 |
Hi, just measured the thickness of the front brake disks on my Civics, but I could not find the minimum thickness engraved on the discks. So I wonder if any of you knows ths specs, minimum thickness, and if you also know the maximum thickness (when the discks are NEW) that would
|
| Good body shop in Dallas? | 28 Jul 2005 04:29 GMT | 19 |
My 2003 Pilot took a pretty good hit in the front. Unibody intact, but quarter is panel is nasty. Looking for a good body shop in Dallas. Suggestions appreciated. (to the list, please)
|
| How hard is it to do a clutch job on a 1998 Honda accord? | 28 Jul 2005 02:59 GMT | 1 |
How hard is it to do a clutch job on a 1998 Honda accord?
|
| shift knob? | 28 Jul 2005 00:33 GMT | 2 |
This is a question about a characteristic difference in --manual tranny-- shift knobs. What makes the difference (in feeling) between a shift knob in a Civic versus the one in an Accord? The (1998 LX) Accord shift knob does not
|
| Tire Change | 27 Jul 2005 22:50 GMT | 3 |
I have a 2002 Civic with over 59,000 miles and is wondering if it is time to change all 4 tires. All 4 tires are OEM. The front right tire has a screw embedded into it. Should I patch up the front right tire or replace all 4? Thanks in advance for the advice.
|
| Bike Rack for 2002 CRV | 27 Jul 2005 22:22 GMT | 1 |
Does anyone out there use a Bike Rack with their CRV. I started looking around and want to know what others are using. I am not sure I like the idea of the spare tire bike rack. I am looking at carrying 2 adult and 1 kids bike
|
| timing belt replacement for 1987 Honda Civic | 27 Jul 2005 21:00 GMT | 3 |
I need to know when to replace the timing belt and if the water pump should also be replaced at the same time.
|
| pilot feels like it stalls | 27 Jul 2005 20:43 GMT | 11 |
A couple of weeks ago, I purchased a 2003 Pilot for my wife. She says that sometimes, while under way, the thing feels like it wants to stall. Does anyone have any idea what that could be? Thanks
|
| Coil / Ignitor / Main Relay Cont. | 27 Jul 2005 20:43 GMT | 5 |
I asked before about what else to do with a rough idling Accord. I had replaced the ignitor and fixed the main relay. It still ran rough at idle and did worse as it ran longer. Well I cleaned the throttle bottle, put in a new PCV, and a new fuel
|