Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Honda Cars / August 2005

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
D15 sleeving11 Aug 2005 19:35 GMT8
Where can I get my D15 block sleeved (iron sleeves) affordably?
Auto-dimming mirror install11 Aug 2005 11:53 GMT3
Has anyone done an install of one of these mirrors?
Thoughts/comments:
'03 Civic EX
Thanks!  carbon man
91 SI rebuilt motor eats litre of oil per week!!!11 Aug 2005 04:29 GMT1
Hey All.. I rebuilt my daughters 91 Si, had burned and bent exhaust
valves. Put in new rings, valves, valve seats, gaskets and all the
necessary items needed. Break-in period was gentle and 2000 kms.
It passed the emission test no sweat, but after about three months
Oil Leak11 Aug 2005 00:58 GMT4
My wife has a 1986 Acura Legend.  The oil seal around the pan has gone
bad, and it's leaking quite a bit.  I have never had this problem with a
car of mine before, so is changing/replacing the gasket around the oil
pan something that a "regular person" can do, or are there ...
does 1999 4 cylinder have balancer shafts11 Aug 2005 00:50 GMT3
getting brave enough to change my timing belt on 1999 honda accord 4
cylinder
so far i have looked at step by step instructions for timing belt
instalation off of the internet however this information was for early
valves or pinging?10 Aug 2005 22:49 GMT5
Hi, how can I tell the difference between valve misadjusment and
pinging? next time I fill up I am going to try higher octane, 93
instead of 87, if the noise goes away I conclude it is pinging, if the
noise remains I think it must be the valves. is this logic correct or
Engine heating10 Aug 2005 22:32 GMT8
I just bought a Honda civic Dx 1994 having 170,000 k miles on it. 2 days
back i found out that when the car is idling the temperature gauge for
engine heat rises above the half way going towards hot, when i start
driving again the temperature gauge returns back to below halfway ...
Rear Alignment in '91 Civic?10 Aug 2005 18:51 GMT10
Before I move to another state, I went to the same Honda mechanic for
decades.  Before I left, I had him give the car one last look and fix
everything that needed fixing.  I got new shocks/structs and other
funky things.  And a week later a new radiator because the old one
Radiator coolant10 Aug 2005 16:21 GMT4
I have a 1991 Honda Accord. I just checked the radiator coolant level. The
level inside the radiator seems to be okey, but the reserve tank is nearly
empty so that the connecting tube just touches the coolant surface. I had a
mechanic check the level, and he said it is okey. ...
1988 Accord LX A/C Problem10 Aug 2005 03:50 GMT1
I have a 1988 Honda Accord LX 5spd. 206k miles on the clock. The car has
been an excellent vehicle. Bought it used in 1991 w/ 88k mi. My problem is
with the A/C.Can't get it to come on. The blower works but that's
it.Shouldn't one of the rad fans come on when the blower switch is ...
How do I find (and fix) problem with main relay on 91 Accord??10 Aug 2005 03:24 GMT3
When its hot out, my 91 Accord will not start.  The check engine light will
stay on.  After banging on the dash and letting it sit for a while I turn the
key and I hear the fuel pump kick in (which it didnt before letting it sit)
and it will start on the first crank.  I have heard ...
Oddesy V. Sienna10 Aug 2005 03:19 GMT5
I was seriously considering a Sienna or oddy . So I did what I usually
do when I'm going to buy a new car, I test drive an older version. I
tested an '01 Sienna. I wasn't impressed. It felt tired but only had
about 64k miles or so.
Frozen and/or broken brake bleed valves.09 Aug 2005 23:56 GMT3
Anyone have any advice on how to free frozen (rusted)
bleed valves.
And if they brake, what is the easist, and cheapest
fix. I could always replace the caliper/wheel cylinder,
Smart Brand Car09 Aug 2005 18:40 GMT6
http://www.threepointmotors.com/smart/index.asp
A picture of the Smart Car is at the above site.
I visited the site and was amazed about how small it is.
My question: Would it be able to keep up with traffic if the speed limit
Civic 2k Cabin filter09 Aug 2005 15:51 GMT2
Dis they have them yet or did it just pop up later?? Can't seem to
find any info pre-2002. Am i just destined to breathe a bunch of
pollution???  :-)
Thanks,
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 July, 2005
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.