| Thread | Last Post | Replies |
|
| 2005 CRV ipod | 09 Jun 2006 20:51 GMT | 19 |
I bought myself an Ipod today and I'm trying to figure out what to get to hook it up to my CRV. Has anyone done this? Did a harness do the job? or did you have to buy the fancy shmancy adapter kit? thx.
|
| car | 09 Jun 2006 18:36 GMT | 10 |
i have a problem with my Car it has a noice when u press the gas PEddle. Sometimes it looses power and want idol the mech say my pvc is pluged any 1 no what's wrong? Also when I press the break petal it goes to far I try to install stero but
|
| Symptons for Fuel System Cleaning | 09 Jun 2006 17:54 GMT | 4 |
How can you tell when your fuel system needs to be cleaned for a Honda?
|
| 97 Civic Headlamp replacement | 09 Jun 2006 06:50 GMT | 1 |
The driver's side headlight is out and I'm not sure how to replace it. The power steering pump is directly behind it and restricts access. Unscrewing the headlamp assembly doesn't give enough play to get the new bulb in either. Anyone know how this is supposed to be accomplished? ...
|
| ODB-II location in 2006 CR-V? | 09 Jun 2006 06:46 GMT | 2 |
This looks pretty useful: <http://www.thinkgeek.com/gadgets/electronic/8426/> Does anyone happen to know offhand where the OBD-II connector is in a 2006 CR-V? LX model, if that matters.
|
| Smart Azze's | 09 Jun 2006 04:01 GMT | 6 |
This is for you all with the smart azz comments~I don't need new glasses and I have 20/20 vision but you do need to tell your grandma to stop pulling in front of me~And don't be jelous because my cars looks and runs like the pink one in the Fast and the Furious~Your lucky you guys ...
|
| Sad day | 09 Jun 2006 02:21 GMT | 3 |
just sold my 87 honda accord 3 door with 216K miles on it for $200. replaced it with a new toyota yaris. The accord was nicer, should have fixed it up and kept it. Best engine I've ever had in a car. 2.O EFI. Thanks for the memories.
|
| Ping: Elle, Michael, Teggar... | 09 Jun 2006 01:20 GMT | 24 |
On my "antique" '83 Honda Civic 1300 FE, I can find no reference on changing the timing belt other than an "inspection" at 60K (miles). I have the factory manual and owner's manual. The current belt is new but would I be correct to assume that 60K is a
|
| How do i set the timing on my 1995 Honda Accord. 4 cycl. Vtec? | 09 Jun 2006 01:15 GMT | 1 |
Pls help me with process for setting timing on my Honda Accord?
|
| is BFgoodrich T/A T tires heavy for accord? | 08 Jun 2006 22:23 GMT | 8 |
I saw good ratings on this bf goodrich T/A T in tirerack.com. When I called up a tire store, they questioned why I wanted a tire that would be too heavy for my particular car. This car is a Honda Accord LX 2001 (196/65/15).
|
| How to check 2001 Civic Engine code | 08 Jun 2006 19:53 GMT | 6 |
Where do I find the ECU and can I check the engine code from jumping a service connector like on the 2000 civic? Also can I reset a engine code by removing and replacing a fuse instead of removing and replacing the battery connection?
|
| 2000 civic brake replacement? | 08 Jun 2006 18:40 GMT | 3 |
I'm considering buying a 2000 Civic VP with 78,500 mi on it from the previous owner. He says the car is in great shape, but that last time his mechanic saw it s/he said that the brakes were 45% done and would need to be replaced before this winter. Is this plausibly normal? How
|
| 2007 CRV? | 08 Jun 2006 12:09 GMT | 2 |
Anyone have information on the new CRV? It is supposed to use the same chassis as the Acura RDX with I think will be built on the larger Civic platform.
|
| 97 Civic HX Door lock issues | 08 Jun 2006 06:46 GMT | 1 |
Hey guys, I recently picked up a used Civic at a local dealer. one of the downsides was that the power door locks dont work and they couldnt figure it out:banghead: . I have metered the wires and they seem to be dead. Using a jump pack I was able to check both accuators and they
|
| 2001 honda civic EX - How do i remove the passenger seat? | 08 Jun 2006 06:31 GMT | 3 |
2001 Honda Civic EX 2dr How do i remove the passenger seat? i'm trying to slide it off the rails but something is stopping it from being slid all the way forward. i would like to refrain from unbolting the posts for safety concerns.
|