| Thread | Last Post | Replies |
|
| 2000 CRV Door panel removal | 23 Jun 2006 01:23 GMT | 8 |
Has anyone removed the drivers door panel on a 2000 CRV. The window was stuck half way down with the motor running. i would like to removed the panel myself
|
| Cooling fan | 23 Jun 2006 01:07 GMT | 6 |
I have a 1991 Honda wagon and the cooling fan quit working about a year ago this week.It wasn't really a problem till about a week ago when I was sitting in traffic and ....well you can understand the scenario. I know what you are thinking, dumbass....
|
| setting the time on radio | 22 Jun 2006 18:53 GMT | 1 |
how do I set the time on my radio (1996 passport)?
|
| ABS light 1996 Accord | 22 Jun 2006 15:37 GMT | 1 |
The ABS light remains on in my 1996 Accord. The brakes feel and work normal. Is this a wheel sensor problem? Are these expensive? I heard I could also try to clean the sensor and wheelrings. After cleaning,
|
| 2006 Civic idle speed | 22 Jun 2006 11:16 GMT | 7 |
My 2006 Civic LX (manual transmission) idles around 600 or 650 rpm. I can feel a definite vibration from the engine while stopped. It's a bit annoying, but I won't be concerned, if that's normal for this car. Is it normal?
|
| '06 Odyssey - sonic "thumping" with sliding door windows down | 22 Jun 2006 03:55 GMT | 11 |
When driving at highway speeds, our '06 Odyssey produces a wierd sonic "thumping" sensation when the sliding door windows down (even just partly, in my experience) while the drv/pass windows are up? Lowering the front windows or raising the sliding door windows makes the
|
| Bye Bye Honda Fit! Helllllllllooooooooooo Mazdaspeed3!!!!! | 22 Jun 2006 03:48 GMT | 28 |
And here it is!!!! http://www.mazdausa.com/MusaWeb/displayPage.action?pageParameter=upcomingMS3 BYE BYE, HONDA FIT!!!!
|
| Brake Flush Bleeder Bolt Adapters? | 22 Jun 2006 01:58 GMT | 21 |
I did a brake flush yesterday, by myself for the second time, on my 91 Civic LX (176k miles). I use the Mity-Vac system ( a hand-held vacuum pump, connecting to a small container to collect fluid, tubing, and adapters). It went
|
| Honda Fit. Too expensive? | 22 Jun 2006 00:17 GMT | 4 |
I was over at one of the Honda dealership in Toronto and was seriously contenplating getting the 07 Fit. I figured that I could trade-in my old 98 Hatch and drop an additional $16,000 and if I'm lucky, land myself a Manual LX. The Dealer had a Black Sport that hadn't moved in
|
| 2001 Accord Silver Rear Bumper | 22 Jun 2006 00:09 GMT | 1 |
I searched all the Honda forums but could not get information on how to identify the type of plastic on my 2001 Accord LX 4 cylinder ULEV Sedan. The bumper has some chipped off paint and some minor scratches... no dents though ..from the previous owner and I want to
|
| How would you guys evaluate used cars? | 21 Jun 2006 20:22 GMT | 1 |
I'm thinking of getting a used Honda Civic for fun (I already have 3 cars, LOL), and I'm just wondering what can I do to protect myself from buying a piece of sh.t?
|
| 2005 Accord Oil Consumption: How much is too much? | 21 Jun 2006 20:10 GMT | 19 |
I"m wanting to know how much oil consumption is too much? Is it what the factory would lead one to believe? I find it hard to believe, and disgusted that I'm expected to believe that 1 quart per 1000 miles is the acceptable limit.
|
| 96 Accord rear main seal replacemet | 21 Jun 2006 15:49 GMT | 6 |
Next month I am planning on replacing the rear main seal on my 96 Accord 2.2 w/auto trans myself.. Are there any Honda peculiar tools I should buy that I will need to get the job done. What is involved after removing the transmission and torq conv? Any other parts I should ...
|
| Honda Oil Filter Vs. Fram Oil Filter? | 21 Jun 2006 11:49 GMT | 12 |
I know that the Honda oil filter is made by Fram; however, the Honda filter has a tapered O ring as opposed to the Fram filter which does not. Does this make a difference? Has anyone used the Fram oil filters? Any leaks? Thanks
|
| 92 Civic DX starting problem at fill-up... | 21 Jun 2006 03:00 GMT | 4 |
My car sometimes has problems starting after stopping at a gas station to fill up the tank. It is running fine when I pull into the station, but after filling up it the enginge will turn, but it will not catch. Usually I just have to wait about 5 to 10 minutes and the car will
|