| Thread | Last Post | Replies |
|
| UPDATE - Manual Transmission Fluid Change | 03 Jul 2006 19:44 GMT | 2 |
Thanks to all who responded to the original post several days ago.. with advice and hints. I did the flush and fill myself today.. 2 quarts of Honda fluid cost me $10.60
|
| 2007 Honda CRV: Wither the SUV? | 03 Jul 2006 17:24 GMT | 3 |
I just ordered a new 2007 CRV, but what have I ordered? Is it an SUV or is it a car? I think it is not. Not an SUV and not a car and certainly not a "cross-over" vehicle. You tell me what you think it is.
|
| mpg 97 civic | 03 Jul 2006 15:46 GMT | 7 |
I was looking at http://www.fueleconomy.gov/ and it rates my vehicle at 37 (city) and 40 (hwy). With the way I drive I have never been real close to that. Never, not even when I first bought the vehicle. I can get a combined 35-37 pretty easily with my drving style. What is the
|
| Redline Watter Wetter? Pros & Cons | 03 Jul 2006 01:57 GMT | 1 |
I have been thinking about using Redline Watter Wetter in my 1994 Civic DX. I saw some debate about this with mostly positive reviews but some negatives and no definitive answers. I would be using it with a 50/50 solution of water/antifreeze.
|
| Yet another car that whoops the Honda Fit's a.s | 02 Jul 2006 21:42 GMT | 18 |
http://www.vw.com/rabbit/index.html
|
| Cleaning the inside of the rear coupe window behind the center brake light? | 02 Jul 2006 19:39 GMT | 5 |
Anyone have any great ideas on how to clean the inside of the rear window behind the center brake light? I looked in the manual and I called Honda - no good ideas! Thanks,
|
| Coolant flush 2000 CRV, Tips ? | 02 Jul 2006 16:36 GMT | 5 |
I bought a 2000 CRV for my daughter and want to change the coolant. What's the best way to do it? Where is the drain plug? I hope it's easier to do than it is to change the oil filter in the damn thing.
|
| 90 Accord Front Suspension Rebuild Contd | 02 Jul 2006 15:23 GMT | 1 |
A correction or two... the locknut on the outer tie rod end is a 19mm, not 17. And when installing the lower ball joint in the steering knuckle, make sure the cotter pin hole is parallel to the knuckle, not in line with it. You want to be able to replace the cotter pin as easily ...
|
| 90 Accord Tie Rod Ends Contd | 02 Jul 2006 08:59 GMT | 1 |
A correction or two... the locknut on the outer tie rod end is a 19mm, not 17. And when installing the lower ball joint in the steering knuckle, make sure the cotter pin hole is parallel to the knuckle, not in line with it. You want to be able to replace the cotter pin as easily ...
|
| Oil Change special $15.00 | 02 Jul 2006 02:22 GMT | 6 |
hey everybody i have an oil change speical 15.00 honda vechiles only all you have to do is mention this ad
|
| Accord cranks, no start | 02 Jul 2006 01:26 GMT | 3 |
Got home from dinner and had a message from our son in Columbus a couple hours south of here. "Dad, my car (98 Accord, 100K) turns over, but won't start. I called him and directed him to Goggle main relay Tegger FAQ, and
|
| Thanx Guys :) Mike Pardee~Patrick~Matt lon~CritterDawg | 01 Jul 2006 23:30 GMT | 2 |
Thanx for all your help I do appreciate it. Now my Honda is doing some wierd shyt~When I do run the a/c I listen to the engine like idle up and down like when a pump is running or something~I DO always watch my temp guage just in case~But another thing my car is doing is getting ...
|
| 92 Honda Accord EX Knocking/Rattling Sounds while driving. | 01 Jul 2006 18:53 GMT | 3 |
I'm not sure if anyone out there can help me with this, but recently while driving my 1992 honda accord EX it has been making this terrible knocking/rattling sound wheneverr I hit a bump in the road. It almost sounds like something is totally broken off and just bouncing around
|
| How do I reset "Maintenance Needed" light in 2003 Civic? | 01 Jul 2006 15:53 GMT | 25 |
I know that it is probably easy, like patting the top of your head and rubbing your tummy, but what is the proper proceedure? TIA glen at ccim dot net
|
| Clicking, but no starting | 01 Jul 2006 15:41 GMT | 11 |
I recently replaced the clutch and flywheel on my 92 1.5l Civic LX. It was running just fine, but now when I turn the key all i hear is a clicking noise. It sounds like the solenoid is working, but the starter motor is not turning, any thoughts or corrections.
|