| Thread | Last Post | Replies |
|
| working on a 1995 Hyundia oil pump problem | 30 Sep 2005 20:22 GMT | 1 |
Hi I'm working on a 1995 Hyundia Elantra with a 1.6l dohc and the people got it from say that after the engine got hot the oil pump would stop
|
| "passenger air bag off" light question | 30 Sep 2005 18:07 GMT | 5 |
reference to '05 elantra. I had some school books in the passenger seat. After i turned the engine, the "passenger air bag off" light came on. It stayed on and never shut off.
|
| Where is the DRL-relay located (sonata 94) | 30 Sep 2005 17:30 GMT | 2 |
Hi, suddenly I have no more automatic headlights turned on when the car is running, I have to turn them on manually. I believe this can be caused by a deffect relay. Any other suggestions? Where can this relay be found? (exactly please)
|
| Help With Rear Brakes | 30 Sep 2005 17:28 GMT | 1 |
Need help with rear brakes on 96 Elantra. Wanted to change rear shoes and pack wheel bearings at the same time. In order to get to the bearings, I needed to remove the hub nut. The nut was punched into a depression in the center of the spindle and when I removed the nut by ...
|
| 91 Scoupe Problems | 30 Sep 2005 17:24 GMT | 1 |
My buddy Jet has this car. He's terrible at maintaining it. (ie never checks fluids until something goes wrong :() Apparently it has started doing a 'grinding' noise near the pulley
|
| Hmmmmmmmm | 30 Sep 2005 13:33 GMT | 5 |
Just bought an XG350l and was wondering if there was a news group just for them or if you could post a message here ? I have read thru all the mesages here and havnt seen one post about an XG350, is it because they have no problems ( hahahaha ) or am I just in the wrong group... ...
|
| '99 Elantra....intermittent hard starting | 30 Sep 2005 12:44 GMT | 3 |
Our '99 5speed wagon with 94k (bought new) has recently began to take several spins before it starts...but not always. Sometimes from a cold start it will take 6 or 7 turns. If I shut it off and restart, it will fire right up, normally, sometimes :-)
|
| 1992 ELANTRA TIMING BELT | 30 Sep 2005 03:17 GMT | 3 |
ANYONE HAVE A DIAGRAM OR INSTUCTIONS ON HOW TO CHANGE THE TIMING BELT ON A 92' ELANTRA? POSSIBLY A ONLINE DIAGRAM? THANKS!!
|
| removing oil pump on 1995 Hyundia Elantra | 30 Sep 2005 00:53 GMT | 10 |
I'm working on a 1995 Hyundia Elamtra trying to remove the oil pump the chilton manual I have say something about removing the left side cylinder block plug to hold the left counter balance shift
|
| 2000 HYUNDAI SONATA 2.4 | 29 Sep 2005 22:51 GMT | 1 |
I WOULD LIKE TO LOCATE THE FUEL PUMP RELAY, CAN SOMEONE TELL ME ABOUT IT.
|
| Steering rumbling | 29 Sep 2005 22:48 GMT | 7 |
I have not driven my Sonata 2000 V6 for a while until today and was unpleasantly surprised to hear some rumbling coming from the front. I noticed that when the steering wheel is straight or to the left the rumbling persists, if the wheel is to the right it diminishes or even
|
| Problems on Hyundai 2001 Tiburon | 29 Sep 2005 17:52 GMT | 7 |
Alright, I have been experiencing a few problems with my car. First off, my check engine light has been on and I have been around to places in town and they all say that its my charcoal canister. I need to have someone who works on emissions to fix it, I may have a blockage in the ...
|
| do I need a puller to get crank pully off? | 28 Sep 2005 21:49 GMT | 1 |
When doing the timing belt, do I need a puller to get the crank pully off, or does it come right off after taking the bolt out? Is it reverse threaded? (99 sonata v6) Thanks
|
| 99 Sonata "check engine" light | 28 Sep 2005 20:21 GMT | 4 |
My wife was driving the car the other evening (after we just got back from a 250 mile round trip) and the "check engine" light came on. The car still drove perfectly and started fine. I took it to Autozone yesterday to pull the engine codes, they hooked the scanner up and they ...
|
| new brake sound | 28 Sep 2005 18:35 GMT | 5 |
I just installed new rotors and pads on the front of my 2000 Sonata and everything was fine the first day. The following day I noticed a slight metallic rubbing sound, mostly from the front driver side wheel. I took it back to my mechanic, he test drove it, and he said I should give ...
|