| Thread | Last Post | Replies |
|
| Front wheel bearing, XG350. Can it be done without all the special tools? | 09 Nov 2006 23:00 GMT | 1 |
Looking at my service manual there seems to be a number of special tools required to do a front wheel bearing. But it also looks like one might be able to get around most of them. Anybody ever done one and have advice? Or would I just be better off bringing the car in and ...
|
| Noise in 2000 Elantra | 09 Nov 2006 17:25 GMT | 3 |
I have a 2000 Elantra with about 108,000 miles (just out from under warranty, of course). The transmission has never given me any problems and I've had the fluid changed according to the schedule. The other morning as I was turning into my work, a slight noise started
|
| Elantra 2001 | 09 Nov 2006 13:11 GMT | 2 |
I got an estimate for Elantra 2001 in Atlanta for brake repair as below;- 1) Replace front rotors & pads 2) Replace rear dum & pads
|
| 01 elantra vibration/noise | 09 Nov 2006 03:16 GMT | 4 |
okay, after changing my cv axles last weekend,(thanks for your guidance on that one hyundaitech!!) my elantra has developed an interesting new noise. as I accelerate through the gears, I've noticed in the range of 3100 to 3300 rpm (manual trans) that I get a weird noise/vibration ...
|
| Any SANTA FE owners with close to 100,000 miles yet ??? | 08 Nov 2006 23:40 GMT | 2 |
Ive got a 2002 Santa Fe with 31,000 miles on it, and, its just as tight and rattle free as the day i brought it home. Just wondering how they are with alot of miles on them, and, what problems people have had up to the warranty expiration ? Would you buy another Santa Fe ? Have ...
|
| 2002 XG350 timing belt problems | 08 Nov 2006 23:23 GMT | 3 |
Finally did the timing belt on my 2002 XG350 now that it just turned 90,000 miles. After about 8 hours of hidden bolts, no access space, and bleeding knuckles it was finished. Started right up, ran it around the block...running good. Next morning I drive to work. 50 miles. ...
|
| Rattle Noise 2006 Sonata 4 Cyl. | 08 Nov 2006 22:15 GMT | 8 |
A rattling sound from the dash has started and it happens at all speeds. I thought it was coming from the radio area, but I really can't say for sure. Nothing seems to bee loose. Anyone else have this problem and if so, was there a fix? It is under warranty so I will
|
| Battery test? | 08 Nov 2006 21:19 GMT | 7 |
My garage has recommended that I replace the 5 year old battery in my car and avoid failure in cold weather. The mechanic mentioned that it failed a test twice. At the moment, the car starts admirably and after topping up with my trickle charger, a cold start is just as good as a
|
| sonata hybrid? | 08 Nov 2006 20:31 GMT | 1 |
When will sonata hybrid be coming?
|
| digital clock does not work in accent 2005 model | 08 Nov 2006 20:26 GMT | 6 |
I've only had this car for a few months. everything is fine with it exept one thing. the digital clock does not work, continuously. it switches on and off when it feels like it. Can anyone shed some light on what the problem may be???
|
| Wobble in car | 08 Nov 2006 18:11 GMT | 1 |
I have a 2003 hyundai accent base model that has a noticable "wobble" at speeds above 10 km/h. At about 40 km/h it seems to be the worst, and then fissles out at highway speeds. The wobble is really a noticable up-down movement of the entire car, and is hard to localize it to ...
|
| Resetting Engine code for 2001 elantra GLS | 08 Nov 2006 18:04 GMT | 2 |
My "Check Engin" light came on today. I opened the hood to find that when i got the oil changed about a month ago, they didnt put the radiator overfill cap back on so the take was neerly empty. I fill the radiator up to the correct fill line but the light is on. My thoughts
|
| Can XG350 crank and cam position sensors be tested with multimeter or scope? | 08 Nov 2006 18:02 GMT | 1 |
XG350 ran 50 miles after new timing belt installed, now won't start: no spark. Suspect crankshaft position sensor, but would be nice if I could verify before replacing it. The manual shown it as a simple variable resistor with the wiper being the sensor output and the other 2 ...
|
| Sonata too fast??? | 08 Nov 2006 17:00 GMT | 24 |
A fellow at work bought a 200 Sonata V-6 for his wife. After about 7000 miles, she decided it was too fast for her and the traded it for a 4 cylinder Camry. Her complaint, it seems, it that the throttle is too sensitive and it takes
|
| Rotors for 2001 Accent | 08 Nov 2006 13:54 GMT | 8 |
I need to replace the front rotors and pads on my 2001 Accent. The rotors are rusted and the pads have 25% remaining. Do I get stock parts or are there better after market rotors which will resist rust?
|