My 97 Excel has a broken door handle so while I'm replacing it.
The lock has worn and so has the key. The question is, where is the
replacement code for the lock so I can get a new key cut and a lock
made? The lock has 2 X-3 cast into its side and R11 347 on the lever.

Can anyone tell me how to reset the check engine light On a 2001
Tiburon... it came on and had a #1 cylinder miss firing code showing
on the meter I borrowed from a friend.....I fixed the problem it was a
bad wire to that cylinder so I replaced all the wires along with the

Hi, I've just bought a one owner low Klms Grandeur XG (2000).  It has the
3ltr V6 (Sigma) with 5 speed auto trans.
Does anyone know if this engine/trans combo was sourced from Mitsubishi or
were they designed and made by Hyundai?

Hyundaitech is back. All's right with the world.

I have an Australian Excel, 1998, manual, 1.5L DOHC, 150,000km.
For a while now it has a miss on acceleration, clears up above 1800~2000
revs.
Checked the engine codes 4444 (all clear). (Pre OBD2)

It says in the owners man. that the fuel filter is supposed to be
changed at 42 mos. (which comes before I hit 52,500) I asked my
regular oil and lube place about doing it, and they said they couldn't
because the job was too complicated involving dropping the gas tank

I have a 2003 Santa Fe.  It is the AWD 2.7L engine, GLS version and has
recently passed 60,000 miles.   I have had the timing belt changed and the
various other required service items taken care of, however there is
something in the maintenance schedule in the manual that I have ...

My Hyundai multi point inspection report says that disc brakes need to
be changed at 3mm or less and drum brakes need to be changed at 1mm or
less.
I am wondering how many millimeters thick the pads and shoes are when

My boss is looking to purchase a new car for his wife. The dealer
is offering him $3500 trade-in for her old car. He is offering it
to me for the same price.
    The vehicle is a 2002 Hyundai Sonata LX, 6 cyl blk/blk with 102K

OK, here's the CLiff's notes version.
My firend has a 2004 Santa Fe GLS with the 3.5L and 4WD.  The other day
here engine "blew up".  since she hadn't had the coolant changed acording
to schedule the dealership is trying to nail her for not following the

I have an '03 Accent manual trans at 40,000 miles that runs great. I
have it serviced at Terrible Herbst every 3mos/3,000 miles for oil
change and fluid fill/check. At 30,000 miles I replaced the spark
plugs per the owner manual's scheduled maintenance (I keep detailed

Just a question if anyone can help, it would be appreciated. My daughter's
Sonata has the Mitsubishi 3L ('98 model) with all the accessories, its a
Levant. Anyway I can't buy a manual for it in Australia, as the speedo has
failed. The automatic transmission is also Mitsubishi and I ...

I have a 2003 Santa Fe 2.7 AWD and I have a question regarding the 60,000
mile timing belt & related maintenance.
This is currently on a lease (about 10 months yet) and we had been
discussing talking to the dealer about trading it in on a new model.    It

I'm starting to build a spoiler/wing for my  using aluminum and a
actuator for the rear of the car.Has anyone tryed this??

1.  Just got my Elantra out of the body shop.  They worked on the passenger
side doors and now the radio is broken !!  When the power is attached to it
it blows a fuse.  Any idea how the body people could have ruined my radio ?
Would a hot wire to the speaker wire fry a circuit ...