My '96 Grand was involved in a traffic accident several weeks ago. My
car struck another car from behind at about 15 mph. The front bumper,
the metal cross piece behind the bumper and the charcoal canister had to
be replaced and the front end alignment was seriously out of whack. ...

is it possible to paint the fender flares?  i'd rather have true black
flares than the UV beaten gray that mine have become...  is it possible to
get some spray paint and just paint them black again?  if so is there a
specific kind of paint that would work?

......no not for me! I need the destructions for a 88 wrangler. The bikini I
got came with the jeep and I can't get it to fit right. I went to bestop's
website and tried to download them there...but for some reason the pdf came up
blank.

The other day I was leaving my sisters house and as I  sped up (35 mph
~2400rpm) I got this intense high frequency vibration or shaking
feeling until I let off the gas and it would go away. I repeated this
on the way back to my sisters house. I would put it in 2nd and just as

I've got a 2000 Wrangler, 4WD and an automatic. Shifting into 4Hi is easy
enough. But getting it into 4Lo is a pain. Doesn't seem to want to go in if
I'm stopped. And the owners manual says I should be 'coasting slowly' when
shifting to 4Lo... but how do you 'coast' in an automatic? ...

How low is low PSI,  I drop mine to 20psi (31 10.5 on 8" wheel), but how low
can you go before you have trouble with ruber coming off wheel?
Does the tire and wheel size matter when you answer this question?
Thanks,

Guys, on my XJ, I have one switch on the right side of steering wheel, near
the rear wiper switch. It's written ''trans -power and -comfort. What is
going on when I switch this on a "power"? I usually tow my boat behind and I
would like to know if there is some improvement with ...

It's not jeep related but still good to watch.
http://onlinetonight.net/images/hhonda-ad-300k.swf
Six hundred and six takes it took, and if they had
been forced to do a 607th it is probable, if not

My friend purchased a refurbished long block for his 85 CJ7 and when we were
installing everything back together it looks as though they used an 87 block
because it looks like it takes a pilot bearing istead of the bushing.  Off
to Chrysler I went and purchased the bearing (which ...

Hi All, has anyone heard of a synch. problem with the NV3550?  I thought I
was having issues with the throwout bearing making noise, but after
replacing it the same noise occurs.  It usually happens while the clutch is
depressed and I am switching for first to second or second to ...

 Got a 95 YJ and the signals on one side stopped flashing, so changed the
flasher first, still no work, then changed bulbs, that fixed it, for about 3
days, now every once in a while they will stop working, both sides, light
comes on but doesn't flash, next time it may or may not ...

Is anyone here is looking for an old Willys Jeep for parts or to restore?
My brother-in-law has a 1953 CJ3B at his dad's farm lot in Cobourg, but
they're selling that farm, so the Jeep has to go.
It was used up until two years ago as a snow plow, so there's only 1800

I have a 88' Xj lardeo with many annonying oil leaks. One of the
culprites was the rear main, So one sunny day (actully many sunny
days) I changed the valve cover gasket, the rear main seal, and the
oil pan gasket. Even though that has been done, It is still leaking,

Can anyone reccomend a good CJ7 hardtop hoist?

I have done some searches, but haven't found any way to identify the rear
differential on my 1998 Jeep TJ.  I am assuming it is a 30 front, 35 rear,
but I was just wondering what identifying marks should I look for?  How can
I tell that I have the 35?  I am asking this question due ...