On my '98 grand cherokee the ac works fine at low speeds but when I
get up to highway speeds it stops working till I slow down.  Any
suggestions on what to check for.  thanks

I just puked when I saw the pics of the Compass.  Auto Week says that
DCX greenlighted it.
http://www.autoweek.com/cat_content.mv?port_code=autoweek&cat_code=carnews&loc_c
ode=index&content_code=02964255
Mort

I have a friend.  He wants to buy a 2003 4-Runner.
Explain to me why the GC is a better vheicle *not* counting
off-road(which he knows the Jeep is better at and has already
factored in)

I'm undertaking the first work I've ever done on my suspension: My
control arm bushings are apparently shot (so I was told by the
mechanic), but I decided to try my hand at replacing them myself.
Well, I started removing the right rear lower control arm last night,

A friend has an 85 CJ7 with a mustang 5.0 in it and a T-5 tranny on.
The clutch setup is a pull on the clutch fork, not a push like a CJ
clutch.
The bell housing, clutch and tranny 'appear' to be the borg warner

Not all 5 bolt rims have the same hole spacing.  Does someone know off hand
what size a CJ uses?

Ok, the wife's 02 Cavalier has a little issue with the brakes in that, when
you apply them evenly, you can feel a sensation that seems like they are
uneven, braking stronger one second and weaker the next. Like they are
warped or something. Is this comman? Should we have it ...

Does anyone make engine swap kits to replace the 2.5L whizzer in my 99tj.
Do most kits require removal of the OEM eng. mounts on the frame, Time for
a V6 or 8 or small diesel. Thanks
Gregg

Offset balljoints were mentioned in a different thread, I have been
wondering for awhile why nobody seems to be making these things.  Now I see
that AEV Conversions sells them, but they are $150!!  Who manufactures these
things, and where can I pick them up for a realistic price?  I ...

What detrimental effects are there of removing the rubber splash guard
under the front of an XJ (a '92 Laredo in this case)?
(I believe in learning from others...uh...experiences. Having my own
tends to be expensive!)

I am trying to run a 12v power connection to
the back of my TJ. I've got some empty spaces
in the fuse block behind the glove box and
thought that might be a good place to fuse the

"93" Grand Cherokee Limited V8
After a couple of minutes/miles on the road, the cruise quits.  Seems like
something may be breaking down with heat.
Any ideas?

There are so many mythes and scams out there.  Is this one of them?  Can
anyone point me to some HARD evidence that I should use sythetics, or
blends?
Alon : )

The ASD relay on my jeep is chattering causing a no start problem.
When I jump it out everything runs fine.  Anyone heard of this.  Its a
2000 tj with 2.5l.

My S.O. has a WJ Limited with the 235 (or so) HP V8 in it... Chrysler had
the never to put a speed limiter on the damn thing... At 115 mph, it cuts
the gas until you have slowed down a few mph and then lets you have the gas
back... Up until the gas is pulled, it is still ...