I love those old jeeps
Wish I could get one brand new
http://www.sundancekidhenrylong.com/perry2.jpg

 <http://www.autoextremist.com/roadamerica03/ra21.jpg>
 Looks like some old jeepoid with a soft top and a red
 wastebasket grafted to the right rear.  Picture just
 low enough resolution can't get the logo or the

I'm looking to purchase a hard top for my 2003 Wrangler & I've
been emailing a guy on ebay that has a top from a 98 for sale.
But he seems to think that starting in 2003 the slots at the top
of the windshield (where the clamp mounts fasten the hardtop

What year did Jeep start using a boxed frame for the CJ 7's?  My '79 CJ
7 is boxed, atleast most of it is where the rust hasn't eaten it, but my
friend has told me that they did not start boxing the frames until '86.

I dug around behind my glove box for about 10 minutes and can't find the two
wires that are supposed to be there for constant and switched +12V.  Anyone
know what year this started in?  Being that I have a '97...I wonder if it
was an afterthought that was thrown in later in the TJ's ...

http://tinyurl.com/2os4u
* * *
Matt Macchiarolo
www.townpeddler.com

I have been watching an M-38 that is for sale. I am not interested in buying
it for the asking price, but wonder if this guy is asking a fair price or
just trying to get lucky.  Don't remember the year but it is military
surplus, in fair condition overall. Body and canvas is OK, ...

local classified ad:
Rear Dana 44 along with the mating Dana 30 front for sale. Both axles
are 3.73 out of a 73 or 74 CJ. 30 spline shafts for the rear. The front
is just a standard Dana 30 currently setup for SOA. The rear doesn't

Hi folks.  I have a 97 TJ auto with 69K miles.  I notice that whenever I
leave the jeep overnight or few hours under very cold condition, the
jeep will hesitate after a few minutes of driving.  I could be driving
up few blocks, stop at the stop sign, when press on the gas, the jeep

probably like many of us, I will be getting my tax return money shortly
and am trying to decide what to do with it.  
I am planning on having about $1,000 - $1500 to work with.  What should
I do to my stock '79 CJ7 current gears 3.54 narrow track axles.

My wife just let me know that she'd like one.  My TJ has been a good vehicle so
far (one year, 12K miles) but it's the first Jeep  I've ever owned.   I bought
the TJ not because I loved the brand, but because it was basically the only
thing out there that was, well, a Jeep.  I  ...

What amount of PSI or compressor strength do I need to support the valves
when I take the springs off?
I see some advertised at 100 Max PSI.  Is this enough?
Comments, suggestions are welcome.

Did anyone else see the Trucks! episode on Spike TV yesterday?  It was the
first installment of a jeep buildup, where the host has taken a new jeep
(Wrangler X) purchased for a very young man by his dad, and agreed to
build it into a "Tombraider"-like vehicle that "looks and ...

I'm changing out my valve stem seals on my 83 CJ7 258.  I have the spring
compressed but I can't get the head of the valve to come up so I can get the
keepers off.  Seems stuck.  I tried grabbing it with a pair of needle nose
but no luck.  Anyone have an idea on what to do here?

I've got an opportunity to buy an '84 CJ7.  Asking price is $2800.  125K
miles, 25K on the rebuilt 4.2L.  Has a header and a relatively new rebuilt
Weber carb.  Engine compartment looks pretty clean, but has a light layer of
oil.  Lifted around 3" (guessing), running 32x11.50 BFG ...