Hey, just got this link from a fellow club member
http://www.high-tec-retreading.com/sizes.html
They are retreaded Mud Tires.  The 33x12.5 are only $67.49 which is
really cheap.  I was wondering what people think of retreads?  Basically

 Manifold?  A/C ( I've never owned a vehicle with a/c before)? transfer
case, etc.I'm picking one up tomorrow unless there are any serious issues
you guys can warn me about.
Jo

Does anyone have experience with Rallytops of Gardena, CA.?
Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
   ** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **

The rear hatch on my '97 Grand Cherokee rattle like crazy, how can I tighten it up?

Replaced in chronological order:
Plugs
Ujoints
Clutch Master Cylinder

When I bought my '79 CJ 7 a while ago the P.O. had installed a manual
choke.  Well it looks like he just attached a cable to the electric
choke.  Is this the correct way to do it?  The problem I have is that IF
i ever get the choke to set the high idle, it never will go back to ...

Ok...
Pulled valve cover...
Sitting there making itself too obvious is the push rod closest to the front
of the vehicle just sitting loose.

I am looking for a "small" lift on my 99 XJ.  I added aftermarket wheels
with larger tires.  I have no clearance problems unless I get some weight in
the rear of the Jeep - 250lbs or so.  Then I get some rubbing on the rear
fender wells.  So I am looking a different options.  I ...

I had to replace the bearings in my rear axle twice within six months and
it's starting to growl again after a few thou.
I think it's a Dana 40 although it's hard to tell.
I want to swap it out for one more durable the next time it goes in and I'm

Sometimes when I get out the car, the rear brake lights stay on for a
prolonged period... is there any reason for this or do I have a fault?

Its been bitter cold here in the northeast lately and the only way I can get
confortable in my '00 Sahara. (I don't wear a coat when I drive) is to run
the heater on bi-level.  The problem is, with bi-level, the AC compressor
runs and I don't want it to.

My '89 YJ was never the best at idling. In the past
I've cleaned out the idle tubes, had my carter rebuilt,
and so on.. Now without goosing the gas, it won't idle
at all. It goes right to stall. At hiway speed it runs great.

Just bought a Brake Buddy for towing 93 Wrangler with hard top. Initial
set up requires weight of the car. I don't have a guess. Any help will
be appreciated.
  Thanks Barry

I have an 84 CJ-7 with the 258 and I have done the Nutter Bypass... I was
wanting to put a hidden kill switch somewhere so nobody couls hotwire the
Jeep and drive off....  does anyone know which wire I would need to put the
switch on?

http://www.msnbc.msn.com/id/3994872/
"Hummer is making a serious run at Jeep's claim to be the premier American
off-road SUV"
HA!  Then climb in your H2 and follow me around Moab for a day!