I was wondering if anyone knows of Web addresses that would help me with my
restoration project?
                                                Thanks for the help,
                                                 rooster

My CJ does not have a horn or a wiper fluid reservior. I went out an picked
that stuff up from a junk  yard the other day. I haven't had time to get
into this much, but I do know that I don't see any wires that look like they
don't have anywhere to go. Does anyone know the color(s) ...

I have a 1985 CJ7.  My turn signal blinks real slow (left, not right).  What
could cause this?  I think I remember reading that it might be the bul b
going??

I just got a call from the shop where I took my jeep to have it diagnosised
for engine "strength".  The guy told me I have compression of 150 psi per
cylinder with no variance between each cylinder.  I'm thinking Great.
However, I looked up the specs in my FSM where they say I ...

 I'm trying to get my first leaf spring on and trying to get the guide bolt
on the upper aspect of the leaf spring in that guide hole on the axle.  It's
becoming a real Bee-atch.  Can anyone give me any hints on how to get that
puppy in there?  I have the vehicle supported on the ...

Hummer Vs. Jeep in SUV Sweepstakes
Sunday January 18, 1:19 PM EST
By Michael Ellis
DETROIT (Reuters) - A long-simmering dispute between the beefy sport utility

I am looking at installing a 2.5 " SkyJacker lift kit (Quadratec 16017
101)  My main questions are: do I need to worry about the break lines,
Steering Column or anything else that a lift causes you to change?
Any and all advice would be greatly appreciated!

Today when opening the rear glass on my 90YJ hard top the handle spun free.
I took the assembly at the bottom of the window apart and it looked like
there was once a sleeve of some sort between the handle on the outside and
the ratchet that retracts the side clips that hold the ...

 Anyone have any idea what kind of oil goes in a transfer case,
specifically a Dana 300, and I imagine full will be when it comes out of
filler hole.

I've got a tube that is hanging near the front axle on my 89 YJ 6cyl, 5 speed.
It looks like it has a gold connector on the end.  I think it's a vent tube for
the transmission.  Where is this supposed to go to?
The front diff vent tube seems to be where it's supposed to be.

88 YJ, I want to tap the "driving" lights (sorta long throw fog lights)
into the highbeam switch so they they are on when the high beams are on.
With the fogs coming on when the highs are off. Then have both sets (fog
and driving) controlled by one toggle. Which would give me ...

I need to repair the turn signal on my 79 CJ7.
I have removed the steeringwheel but there is another plate in the way.
Any idea how to remove it?

to make a long story short, the wifey had an absolute FIT when i started to
agree to accept $23,500 for my rubicon.  said we would keep it for haley
before giving it away so it looks like the rubicon is a keeper since it only
appears to be worth anything to us.  ill still be getting ...

Hey all,
I'm having some uncertainty in diagnosing a fuel system issue, and I want to
make sure I'm on the right track before I start spending actual money on
parts that may or may not fix my problem.