| Thread | Last Post | Replies |
|
| 90 jeep 4.0 Cherokee-no spark? | 18 Jan 2004 22:19 GMT | 5 |
90 jeep 4.0 Cherokee-no spark No spark fro the coil wire No spark after replacing the coil and the ignition control module Could it be the sync signal generator or
|
| Need '01 TJ Front Axle Tube | 18 Jan 2004 22:16 GMT | 1 |
I need a front axle tube or complete axle for a 2001 TJ, Dana 30 w/3.07 gears. The pass. side lower control arm bracket is badly mangled on the one I've got now.
|
| No owners manual, help required! D button next heated rear window | 18 Jan 2004 20:59 GMT | 5 |
'97 Grand Cherokee ltd, what does the D button with a square around it do? Located next to the heated rear window button.. thx
|
| TJ Build up on Trucks | 18 Jan 2004 17:55 GMT | 1 |
FWIW Trucks on Spike TV is doing a TJ buildup. Looks like they have a new 2003 TJ "X" model. Putting a 4" skyjacker lift on right now.
|
| HELP!!! Start/Rough Idle After 45-60 Seconds | 18 Jan 2004 17:50 GMT | 6 |
Here's my problem: I am bringing an old '89 Cherokee Pioneer 4.0L Automatic back to life while I rebuild my '87 Laredo 4.0L engine (got about 250,000 mile on it before it died). The '89 Pioneer was very clean inside and body
|
| Hey! Someone cut my window out... | 18 Jan 2004 17:04 GMT | 6 |
Yep 1998 Wrangler, last weekend someone came by and cut the rear passenger side window out. They dug through the glove box... nothing to steal so they left.. Been telling the wife NOT to lock the doors... oh well... Anyway , does anybody have one for sale or know where I can get ...
|
| Considering to sell my '75 CJ5 | 18 Jan 2004 15:42 GMT | 3 |
I LOVE my Jeep! Unfortunately, I'm getting to the point that I need to upgrade the family car. The family car is separate from the CJ. I just need down payment $ Part of generating money is to part with my CJ. We are going to buy a 4wd. What do you all think about ebay? I've ...
|
| TJ and Pinion angle | 18 Jan 2004 14:05 GMT | 3 |
I have a 99 TJ with about 4 inches of lift (3 + 1 body) and have just swapped in Advance Adapters SYE and CV shaft. I also raised the Tcase and motor. Question: Do I need to adjust the rear diff pinion angle or is the addition
|
| Free downloadable Jeep Rubicon driving simulation from Jeep Corp | 18 Jan 2004 05:33 GMT | 11 |
The PC driving simulation is 62 meg in size and a free download from Jeep. Fairly amusing if you liked Tombraider 2 and the nicely set up vehicle she cruised in. Even nicer if you have a wheel and pedals for your PC. Pretty impressive rock crawling and trailing, even makes
|
| Lug nuts and proper torque? | 18 Jan 2004 04:55 GMT | 10 |
After getting new tires from NTB a month ago, I just found out today that I'm missing a lug nut on a rear wheel. I found this out when I went to retorque them. I've been driving a month on it without realizing it! I'm getting a lug nut tomorrow, but after driving on it
|
| Question on Jeep Liberty | 18 Jan 2004 01:30 GMT | 10 |
Hi all, I'm in the market for a 4wd Jeep LIberty and have the decision to choose between a "Selec-Trac" or "Command-Trac" 4wd mode. The "Command-Trac" only
|
| Help 97 TJ Engine Blown... | 17 Jan 2004 23:04 GMT | 1 |
I have a 97 TJ 2.5 with 135,000 miles... The engine blew while my brother was driving it today... Not sure what happened yet.. All service has been kept up very well... Anyone here have any advice on options.. new/used engine.. Can I put a
|
| Jerry Can strap | 17 Jan 2004 23:00 GMT | 1 |
Does anyone know a good source for the metal strap the holds a Jerry can in the holder on a military vehicle? My M-416 trailer has two Jerry can holders and is missing the straps. I know you can get a nylon strap from Blitz, but hear the metal straps are lockable.
|
| Rubi leaking from dash | 17 Jan 2004 22:07 GMT | 16 |
Okay, brand new, one month old Rubicon. Took it to the carwash this evening (probably my first mistake, but it's literally like 15 degrees F outside) and as I drove away I noticed a small green puddle in the passenger side footwell (in the lipped plastic type mat). At almost ...
|
| Soft Top question on YJ/CJ tub swap | 17 Jan 2004 20:57 GMT | 4 |
I've got a 83 CJ with a 95 YJ tub..still has the CJ windshield...pretty sure of that anyway...I had to drill out those plates that attach the windshield to the tub to make it fit...those huge knobs on either side of the windshield wouldn't line up. Anyway....what soft top do I need ...
|