Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Jeep / January 2004

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Help please (AGAIN!!! #%$**)10 Jan 2004 20:38 GMT5
6 Cherokee 4.0
I tried starting her the other day but left her in gear. She lurched
forward up onto a curb before I shut her down. Not the first time this
has happened... I was really surprised when she would not turn over.
XJ CD-Changer installation....10 Jan 2004 19:17 GMT3
Hey All,
  Was wondering...are the metal "dividers," which close off the rear
underseat area from the rear floorboard, in an XJ mind you, important,
structurally speaking? Installed a 12 disc CD changer and new head
Bad Back or Bad Taste???10 Jan 2004 18:58 GMT8
<http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2451864897&categor
y=6286
>
Signature

___________________________________________________________
tw

Strong Bumpers 10 Jan 2004 12:07 GMT7
Are any of the front or rear jeep bumpers you can buy as strong as one
would be if you made it  out of 1/8, or 1/4 thick 6x6 angle iron. I
would like something a bullet proof as possible. Most of them in the
jeep books dont seem to be made out of stock as thick as 1/8, or 1/4
Blue smoke -- Help!!10 Jan 2004 12:07 GMT10
 I previously had my jeep in the shop looking for the source of what I
thought was ping.  The shop said it wasn't and that the noise was coming
from the valve train.  At the same time he told me he could see blue smoke
coming from the tail pipe.  I couldn't see what he was talking ...
not treading lightly10 Jan 2004 12:05 GMT3
http://www.9news.com/storyfull.aspx?storyid=22645
moe
Bolt Size on CPS10 Jan 2004 06:07 GMT14
I have the CPS for a 93 Grand Cherokee in hand. It's 24 degrees out and I
gotta' stick my arm up into the middle of this old girl. Does anyone know
the size of the bolt holding that crank sensor to the bell housing? Thought
I'd ask while I build up my courage to lay on that cold ...
U-haul won't rent to Explorer users10 Jan 2004 05:14 GMT7
I saw this item in the news tonight that I thought might be of passing
interest to some readers here.  For some time now, U-Haul has been
refusing to rent trailers to people who plan to tow them behind soft top
equipped Jeeps.  Now they are targeting the Ford Explorer:
1993 2.5L lifter replacement?10 Jan 2004 04:33 GMT4
I own a 1993 Wrangler with the 2.5l engine.  After about 130,000 miles my
lifters are starting to get noisy, especially on those cold mornings.
Being, a only if I have to backyard mechanic I decided to look in my
Chilton's Manual to see how involved of a job it would be to replace ...
Location of THERMOSTAT on an 82 Jeep CJ7 , 4.2L, Inline 6 cyl?10 Jan 2004 04:01 GMT2
I know what the thermostat would be in the thermostat housing but
where exactly might I find the thermostat housing on my 82 CJ7. My
heater does not blow hot air and I think it might be the thermostat.
Thanks in advance,
M100 Military Trailer10 Jan 2004 02:55 GMT19
I'm going to look at a M100 to pull behind my CJ7.  The guys says the tires
and shocks will need to be replaced.  Other than that it's in ok shape.  No
major rust but there's a split at the front left and right corners.  Also,
the front panel at the top rail is split.
Weld or bolt roll bar to frame?10 Jan 2004 02:19 GMT12
I've heard seveal people say they'd prefer to do this so in case of roll
over the roll bar does not press through the body.
opinions/comments
Thanks,
Drum brake leak10 Jan 2004 02:14 GMT3
My 93yj with 35c rear axle and drum brake, has a leak comming from somewhere
inside the brake assembly, it's even leaking out of the little rubber plug
where you can adjust the leak.  Come to think of it, I'm not sure if it's
gear fluid or brake fluid?  If it's brake fluid, what ...
Bestop SuperTop & bad fit with OEM soft uppers?10 Jan 2004 01:06 GMT3
Has anyone had this experience with the Bestop supertop on a '97 & up TJ? I
installed the supertop on my '98 TJ and feel I followed the directions to
the letter, however, the doors (OEM soft uppers) won't close flush. The rod
on the upper frame is hitting the bow assembly.
Jeeps must taste good!09 Jan 2004 23:35 GMT10
http://www.rockymountainnews.com/drmn/state/article/0,1299,DRMN_21_2560463,00.html
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.