I have the stock CD unit from my 2000 Wrangler and I'd like to know how much
I can get for it. Also, if anyone here is interested, leave a message for me
here with your offer and email and I'll contact you.
It's in excellent condition. This unit is the one with bass/mid/treble

I am rebuilding a Willys overland pick up.  There are many places where I
could put  stainless steel nuts on regular grade bolts. I would think this
would make removel or adjustment easer in the future. An example right now
would be the nuts that go on the manifold studs and tighten ...

I looked at a 80 CJ7 tonight that had a strange shift pattern.  It is a 4
speed in a classic "H" pattern, but the reverse was to the left and forward
( ie toward the driver and towards the dash).  I did not crawl underneath to
try to read any stamps on it.  But I am stumped at what ...

I seem to have a problem with the blower in my 2000TJ.  Everything's
been fine, but tonight, I left to go out, and my heater worked, I
parked, shut it off, and when I left again about 1 hour later, I
noticed the blower wasn't working....which really sucks since it's -30

I've been finding water in the air cleaner, looks
to me that at least one of the pulse air check valves
is bad. I figure it would be the one that allows
fresh air into the exhaust! Are the two check valves

A friend has dropped by with a toasted clutch and needs his Jeep for
Monday so we are out in the driveway at -25C or so pulling it.
Well, he is pulling, I am passing tools and making hot soup....
Man I am some glad it's his fingers and not mine on those tools.  The

My CJ leaks watter behind the dash and windshield.  Is that just a Jeep
thing or have they figured that out yet?

Ok twice now I've been driving down the road and all gauges on the
instrument panel go limp and the airbag light goes on. so while still
driving I'll put her into neutral, shut her down the start her back up and
all comes back to life. Would anyone know what would cause this to ...

What are the differences between the CJ 4WD system and the TJ 4WD?
I hear limited slip on the TJ what does that mean?

I'm getting a compressor by this weekend to get these changed.  However, a
couple of days ago, when I was trying to change the seals, I noticed the old
ones were riding up on the valve stem.  I'm curious what would cause them to
ride up like that.  Did they shrink or expand?  Is ...

Just a quickie guys, anyone with a 91-97 Cherokee check you local
friendly Jeep dealer for Safety recall A05, Front Disc replacement free
of charge due to discs separating from the hub .......
They say the work will take an hour, and to book the car in 1st to see

Driving a Jeep GC '96 the other day, hit a small bump, and the front
end emitted an extremely loud "BRRRRRRRRRRRRR" - like metal on metal.
This happened several times.
Then I noticed that the steering seemed to get 'softer', and while

Right now I have Jeep Cherokees (2 x 1987) and am looking to upgrade. I can
get a 1994 Cherokee for around $4k if I can find one. I am in Denver area.
Complaints about Cherokee are low power (I drive between 6,000 and 11,000
feet above sea level), not so great mileage (20 mpg on a ...

I took apart my steering wheel a while back to work on the dash. In putting
it back on..I can't seem to get the horn assembly to work right It doesn't
rebound when I push it in. There are basically 3 parts..the sheet metal oval
piece that I think is supposed to be the part that ...

I am making a spare tire carrier that plugs into my 2" receiver.  Can you
provide tip on welding two pieces of 2" square stock at right angles.
__| < this piece on top of the one that plugs in.
What are the heat issues and how to avoid distortion.