Being a relative newbie (3 weeks) into the '00 XJ, I was checking out
the tire pressure/condition , etc,. and noticed that mine is wearing
235/75/15 and the recommended is 225/75/15.  Now I understand that the
first number is tread width in MM?, middle is sidewall height as a

The Michelin LTX M/S tires are starting to get there.
P225-75R15
I may go up to a 235 but not in a 15" rim.  The ZJ is about as
floaty as I want it to be.  May go back to the 215s it came

How do you get the front wiper arms off?
Doug B.

 Just had a compression test done on my 81 CJ, 258 engine, came back with
the following 145-145-145-130-145-160, he said that was great, engine in
good shape. As I've never had a compression test done, #s don't mean much to
me, anyone want to comment on them good or bad?

Hey everyone.
I have a 1988 Jeep Wrangler, 6 Cyl. 4.2 L.
I had a friend replace my Starter Solenoid. Well, he's a moron. He can't
remember where on of the wires go. There are three. One that get hooked up

I need some help locating a set of main bearing bolts for a 1983 258 motor.
The size I need is 7/16 X 2 3/4 inches with 14 count threads grade 8. I'll
tell you where I have tried and hopefully one of you can steer me down some
other paths. I have checked the local Dodge dealership, ...

Hi all.  I was in my new Rubi the other day and noticed a spot on the
floor liner under my brake pedal.  So I stuck my head up under the dash
and looked at and felt the rubber bushing/grommet where the brake pedal
rod goes through the firewall into the booster.  It was wet with ...

I have a 85 cj 7 that I've had for several years. The tub is rusted pretty
bad and I want to fix it up. I have found a tub for sale and they want $800
for it. It looks solid, no dents, light surface rust in floor. Would this be
a good deal?

00' XJ
I thought I remember reading in the Haynes manual (but now I can't find the
section) that the axle hub nut is a 36mm, anybody able to verify that, I
need to go buy a socket.

Greetings; I hope someone can help me here. I just bought a '97 Cherokee 4x4sw.
I have no backup lights and no bulbs. All sources tell me I need a 1056/1156
old-style round base bulb. This is obviously wrong for mine as they are wedge
style sockets. I have tried the only single ...

I would be very appreciative for any help I can get on this one.
I have a '95 YJ 4-popper.  Mostly stock with 30" tires and 91,000 miles.
Early this week I started to notice a sound that is like the scraping
of sandpaper.  The noise does not really change speed as I change speed

Just purchased a new '03 TJ, and I'm gonna offroad this baby!!
Being a newbie and needing skids, tires, winch , Jack.......
where do I start?? I have a limited budget.... gonna go out with local jeep
club when I can, also the Jam is comin' here soon.

My wife and I just bought a 2004 GC Laredo SE, V8, 4x4 with the up country
suspension package. Now that the motor is broken in we have been driving a
lot faster on the freeway. What we have noticed is that right around 80 mph
there is a noticeable vibration/growl that comes from the ...

ok.........another stupid question....
how do you do a search for previous entries on this news group.
I would search for the method but don't know how..........

Is the company that made Rubicon Cargo Trailers still in business?  If so,
do they still have a functioning website?  Links from other websites didn't
work.
Thanks